Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
Resolved! 6506 EtherChannel
I have two Cat 6506 with 2 1000Basex Gbic blades each in slots 2 & 3. Can you form an Etherchannel group with ports on different blades i.e. ports 2/16 & 3/16?Running CatOS 8.3(3).
Resolved! Load Balance
In 12.3T Cisco increased the number of BGP equal path links from 6 to 16. Does any one knows if they increased for the OSPF and static routes as well. Is there any supporting document on Cisco web sites?Thanks in advance..
my Cisco 1700 router is hanging.After reboot it will work fine no problem.What may be the reason...Any one......
hi ! i want to set up r1 and r2 (see below) to get ip address from r3. what do i need to configure on all routers. thanks.r1---r2--r3
Hi, I'm trying to understand the difference between using SVI and EtherChannel versus Layer 3 EtherChannel. I am proposing connecting two stacks of 3750 (using StackWise) connected together with cross-stack EtherChannel but I'm unsure what's the best...
Current IOS for 3524 switches
Model: CISCO WS-C6509 Description of the problem: We have trunk qualified between the equipment cpdv_01 and cpdv_02. Trunk has a connection main in the FastEthernet8/19 interface and secondary in the FastEthernet9/38. The problem is that they are bal...
On a new Catalyst 6509 running IOS is there a way to tell which port a particular server or client is plugged into? (Without tracing patch cables)I have done this on old switch gear with ARP and/or CAM tables. Does not appear to be the same on this...
Hi All,Our C6500(Sup2+MSFC2) is NativeOS and version is 12.2SXF(18).When we configure the command "mls flow ip full" and the C6500 will show "Unable to change flowmask to full-flow because Cx is configured"? We don't know why?Who have same question o...
Resolved! Align-Err & Runts from Cisco 6509
What are the Align-Err and Runts meaning when I got the error counts by show port command. And if I got these error counts, how can I solve the problem. Many thanks.
HelloKindly;examine the attached File....Why we have duplicate mac address ?10xs
Is anyone familiar with the command to clear QoS statistics on a 3750G. There is nothing in the command reference guide and I have tried the following to no avail:Clear countersClear access-list countersclear tcp statisticsClear vmps statistics
Hi allI need some suggestions here. We use an application called Solarwinds Orion to monitor the physical and layer 2 status of our network. Orion works just fine but lacks support for more detailed monitoring. An example of this is the ability to mo...
Hi all,What is the simplest way to make updates to ACL's using the config file so that I download it, make changes and upload simply the changes to the ACL's? Is there a specific procedure to make the upload delete the lines changed first, then uplo...
Please help. I can't log into our 2800 router. I tried the using cisco for the username and password, but it doesn't work. How can I tackle this? Is there a way to reset the username and password?--------------------------------------------------...
