Activity in Technology and Support
Resolved! Cisco 2821 Reinstalling OS takes long time
Hello everyone.I’m currently trying to upgrade my compact flash card memory from 256MB to 1GB. I backed all files on the compact flash card using TFTP transfers and archive tar. So far so good. However 2 things:- Once I put the new compact flash card...
Help Needed: Create Real-Time Change Monitoring Dashboard in Cisco ISE
I’m looking to create a dashboard within Cisco ISE or Cisco DNA Center that provides a real-time view of recent configuration activities. The goal is to capture and display changes made within the last 5 minutes.Requirements:Who performed the change ...
Resolved! How do I disable Music on Hold?
Hi, I'm quite new to voice and collaboration. I would like to know how to definitively disable music on hold. I set the Run Flag to NO on the Music on Hold Server. It worked for a few days, and now the music is back Please help!
WxCC Business Hours Override
I have read the documentation for Business Hours to create an Override. The documentation states, "Use an override to define exceptions to shifts or working hours, based on your business requirements. Associate an override to a working hours schedule...
ISR4451-X/K9 IP BASE IOS issue
Hi , I'm looking for help on the following issue, i'm CCNA certified since few month, and i have an issue on ISR4451-k9-RF, it seems that my customer is facing issue with IOS IP base, On product hasn't the same type of IOS, see attached screenshots ...
FTDv on ESXi with Failover Issues using SR-IOV
I have a use case where I need to deploy FTDv (FTDv100) in a HA pair utilizing two physical servers with the ESXi (7.0.3 - Dell Version) hypervisor, one FTDv 7.4 instance on each. Following the Cisco deployment guide, I am attempting to leverage SR-I...
QOS per tunnel for DMVPN - Spoke to Spoke
Hi AllI am looking at configuring qos per tunnel on my dmvpn.I have a couple of questions.1.I assume the policy applies to the hub end only?2.As there is only 1 MGRE tunnel on the hub, how can multiple qos policies be applied?3.what about spoke to sp...
Resolved! Need help with MPLS TE Tunnel
Working on the following topology.MPLS TE Tunnel on PE1 is successfuly configured.but I cannot reach CustomerB from PE1. The control plane information seems to be ok but I am not sure if the data plane is broken. Any help is appreciated.
Cisco 8200 Throughput
The documentation states that unencrypted throughput is unthrottled and encrypted throughput is controlled by license. What does encrypted throughput mean in terms of the 8200 throughput license restriction? I've read the documentation and I'm still ...
Redundant WAN Design – Asymmetric Routing Issue
Hello Expert,I'm working on a somewhat complex network design and could use your expertise. I have two sites, each with a similar setup: a firewall and a Layer 3 switch.At Site 1, the firewall is deployed in a "router-on-a-stick" configuration with t...
RONA issue for agent calls in webex contact center
Hi Team, we are having issue where some agents are facing RONA issue immediately after the call received or after making an outbound call .the disconnection time is in 1 second only .have verified the extension agent using and is same as configured i...
can no longer ssh into the Primary Admin/Secondary MnT node
My ISE cluster is 3.3 patch-4. Everything is working, and I can GUI and SSH into ALL nodes with the exception of SSH into the PAN node. I was able to ssh into it yesterday but today it stopped working and I received this message:Pre-authentication ...
problems with triple A and VLAN configuration on 150AX
I have experienced problem with Client associated with AP but not shown in the client section, and client could not get internet connection, after checking logs when issue occurred, I have found the following error messages: *apfReceiveTask: May 15 ...
How to get ADSL working through C1117 router
Hi, Does anyone know how to get ADSL working through a c1117? We upgraded to one from a 1841 so I just copied the config over but the dialer wont get a IP address from the ISP. If I look at the dialer int on the 1841 it has a public ip assigned to it...
Media-proxy licensing
Hi everyonei am trying to figure out if any specific smart licensing configuration is required for media-proxy configuration on IOS XE 17.9So far it seems to work nicely and i dont have any “mode border-element” configured under the voice service voi...
| User | Helpful Count |
|---|---|
| 89 | |
| 63 | |
| 58 | |
| 53 | |
| 51 |
