Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I'm currently configuring a site. They have isp that uses a radio link. I been having issues when the internal networks reach out to the internet that they are super laggy and slow speeds. Has any configure a site that instead of having a actu...
Good day team!from today, at a Live Logs http_s://ise1......com/admin/liveAuthenticationDetail.doon some detaled reports I seeNo Data available for this record. Either the data is purged or authentication for this session record happened a week ago. ...
Hello everyone, Using IP MAC Binding option in Policy Profile is just about creating a binding table for itself or it can be used as a trusted source for features like IP Source Guard? Thanks
ISE 3.5 Licensing Consumption Alignment Overview: Cisco Identity Services Engine (ISE) 3.5 implemented updates to its licensing consumption logic, aligning actual feature utilization with documented intent and existing licensing guides. This initia...
Just received a new router from my ISP which seems to have changed my home IP. As I was trying to update my network in OpenDNS settings, I noticed the pop up "your IP address is taken by another user" in my OpenDNS updater. I also can't add this new ...
Hello Cisco Community! I'm having an issue with missing phonebooks for Finesse agents. I checked to ensure that the services on the 2 finesse servers were active and verified pings between Finesse and CUCM cluster. The phonebook disappeared after an ...
I have CUC ver 14 with CUCM ver 14 / Was working with call handler and vm pilot now its all busy. I have tired SIP integration and SCCP integration. Thanks
I have a Cisco Nexus 5672UP switch running NX‑OS 7.3(6)N1(1). The switch was functioning normally, but after performing a reset, the Ethernet ports on Slot 1 (ports 1‑48) are no longer visible in show interface status or show interface brief.
Hi, I have 4 multicast sources sending traffic each to two multicast groups, as follows: 10.65.190.1 -> 224.64.64.110.65.190.1 -> 224.64.64.510.65.190.2 -> 224.64.64.110.65.190.2 -> 224.64.64.5 The traffic enters the router via a VLAN interface con...
Hello All,We have some legacy 7900 colour IP phones on a cucm install, however the displays keep entering sleep mode, is there a way to turn them on 24/7 as they seem to turn off randomly. current settings are for both common profile, enterprise pro...
We are having a SIP call recorder which is recording calls via Built in Bridge functionality. While fetching events from JTAPI, we are encountering below error. Can you please confirm what might be causing this. We have given all the necessary permis...
Hi All,Recently, we migrated our enterprise Wi-Fi authentication method from PEAP to TEAP (inner auth EAP-TLS). Since then, many users have been experiencing disconnections while their sessions are active.In the morning, the Wi-Fi connects and works ...
Hello, everyone. Why are link-local addresses that are used for next hops advertised in type 8 LSAs? Doesn't the router already know them considering that they are used to form the OSPFv3 adjacency? Thank youDavid
Hi Everyone!I am receiving this error message in Zabbix when trying to establish SSH Connection to my Nexus switch"Bad server host key: Invalid key length" I am suspecting the RSA key length. Because i checked the length in my switch and it is only 1...
Hi,can anyone tell me why Cisco is not allowing address reservations outside the defined DHCP pool?At least on ASA and FTD thedhcpd reserve-address xxx.xxx.xxxx.xxx abcd.ef01.2345 insidealways needs to be inside the specified pool.I mean there is a w...
