Activity in Technology and Support
DCA leaving APs on channels with over 40 percent utilization.
Using Model 9800-40 WLCs with Model 9164 APs running version 17.12.4.We have APs that are staying on channels with over 40% utilization and not changing channels under DCA even though there are lot of APs with very low channel utilization. The high u...
ROAS with L3 Switch
Hello,I am having a weird issue which is either difficult or so easy I am missing it and wondering if I can get some help with this. I am working with an organization which has both staff users and public users. They use ROAS and L3 switches currentl...
Design Help: MEC across Domains in Stackwise Virtual
Hello,I am working on 4 devices of C9500s and need to clarify a design to create 2 Domains (each having 2 members)Let's say we have 2 buildings, and each will have 2 of C9500s.In Building A I have a domain 10.In Building B I have a domain 20.Now I al...
SDWAN - configuration push
when I pushed the configuration from manage, it has been pushed the OSPF configuration but rolled back to default with in 3 mins without any errors.please share your suggestions to troubleshoot. I am new to SDWAN
Ensure Network Compliance using Cisco Catalyst Center
Ensure a consistent and secure network infrastructure with Catalyst Center. Gain the tools to quickly identify non-compliant devices, enforce your network standards, and remediate compliance violations effectively—protecting the integrity of your net...
Umbrella IPSec Tunnel Issue
So we’ve been testing Umbrella. I’ve established five different IPSec tunnels in Umbrella to various networks. All had been fine, with all the tunnels active for weeks. For some unknown (to me) reason, one of the tunnels went from active state to unk...
Resolved! DAP to check if a specific antivirus is installed or not by name
I am attempting to set up a dynamic access policy on ASA to check if a specific antivirus software is installed. We use "Sophos Intercept X" for endpoint security. I have not been successful yet in configuring a policy that checks if that specific an...
Building your first NSO Service
Discover how to build your first service with Cisco NSO by creating service models with YANG and seamlessly deploying them into network devices. Master the art of creating streamlined, impactful services to drive efficiency and innovation in your net...
Resolved! UCS Firmware update to Chassis
We are preparing to upgrade our Chassis to 4.1.3m after a previous update to the fabric interconnects and currently have two critical errors:1. FSM:FAILED]: Update identities to external identifier manager(FSM:sam:dme:IdentIdentRequestUpdateIdent). R...
IMM Key Features & Functionalities
In this webinar, you will discover how IMM Simplifies managementenhances visibilityStreamlines operations for your infrastructure
CUCM ring duration call forwarding
Hello everyone,I know I can set the ring duration in CUCM that after a certain number of rings User1's call gets forwarded to User2's extension. But I was wondering if I could set it up that if User2 doesn't answer the forwarded call, then it goes b...
CxCloud API
Hello Community, Is there any way to retrieve device information from CX Cloud via API?I'm specifically looking for details such as hostname, end of sale, end of support, model, IP address, and similar data. If that's not possible through CX Cloud, d...
Mandatory Move to New Authentication for VA and ADC (Legacy Auth EoL)
Virtual Appliance (VA)/DNS Forwarders version 3.7.0 and AD Connector version 1.14.4 introduced Enhanced Authentication. This significantly improved the security of these important components. We kindly request you upgrade to the latest versions: VA ...
Dual ISP wan failover with Public IP
Hello,We recently had a failover test between between our ISP 1 and ISP 2. The failover portion worked fine via the IP sla's but we were unable to pass traffic through ISP 2. I believe the issue is due to the switch we have the ISP connections coming...
Resolved! CISCO 9200 "No space left on device"
Hello,I am trying to update a cisco 9200 switch ( in fact, it's a stack, there a 2 switchs).Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ----* 1 32 C9200-24P 17.06.05 CAT9K_LITE_IOSXE INSTALL2 32 C9200-24P 17.06...
| User | Helpful Count |
|---|---|
| 90 | |
| 88 | |
| 85 | |
| 71 | |
| 67 |
