The system consists of a switch with two VLANs for hosts, and a router with two WAN connections.Switch:Interface vlan10 - 192.168.1.1/24, with some hostsInterface vlan20 - 192.168.2.1/24, with some hostsinterface g0/12 - 172.16.0.2/252, uplink to rou...
Hello Everyone, I am a 20+-year veteran user of Cisco routers and switches but I am fairly new to the ASR 920 series. Recently, I purchased 4 asr920’s for a specialized project. Imagine my surprise when I went to set them up and found that the co...
Using EOS unicon plugin to connect to Arista switch.During device.connect(), password is sent and unicon logs: %UNICON-INFO: +++ connection to spawn: ssh .... Then it times out with TimeoutError error.One specific fact for this Arista switch is that ...
Hi,While waiting for Cisco TAC to analyze all the troubleshoot info and core dumps I want to warn the community about yet another fun experience while updating Cisco firewalls. We had to update our FTDs running 7.4.2.2 which ran fine for months due t...
We have configured our rsyslog.conf file to forward logs to a splunk forwarder, it's working to some degree; unfortunately, there are no GUI user account evnts showing in the logs. While researching this condition I find there is several possibiliti...
Hello,I was having an issue where the AP would not install the image from the WLC (AP image version 17.6.4.56 backup 8.10.183.0, Controller 17.12.5.41)It kept failing with the below errors after a sftp or tftp download (I tried many different .tar fi...
Good Afternoon all , I am looking to configure my ASA in such a way that it allows some public IP ranges from the internet to access a private server residing within our internal network ( port 443 ). I would also like the the destination NAT mappi...
In my environment the control connection between vsmart and c-edge is showing down, handshake sate. With control connection with vm and vb is fine, also no packet drop or issue in isp link as all bfd session like 233 are showing up only control conne...
Hello, Hoping for some help with troubleshooting a calling issue. We have 8851 at our secretaries desks and they access a paging system through a speed dial key on the phone. That SD key dials an ext for at SIP trunk to the PA system. Recently they...
Hi everybody,In the past I made a script to automate PSK rotation in python based on parameters via command line and I am evaluating if it can be ported fully into Meraki automation workflows. I have ported 90% of it but I am missing a way to include...
Hello! i have a perfectly working python script using Netmiko for connection to the devices and PyAts/Genie to do all the parsing, and it works beautifully, i have my organization devices inventory on an excel spreadsheet and with the script i can ...
Incorporate the processing rules for C9300-M device and Nexus 9k and 5k devices so that they are included in the CX cloud. I want to provide an update regarding the investigation into the visibility issues for your C9300-M devices. I have reviewed ou...
We've discovered that multiple analog copper POTS lines that we have (Primarily for FAX), have stopped being able to send out, but can receive faxes fine. During the troubleshooting, a colleague & I have found the following. In the somewhat recent pa...
