Hi, Would like to check if you experience this in your ACI. Currently, we have OOB with 192.168.0.0/24 network and I need this to be reachable with the workloads hosted in ACI (overlay or ACI as a gateway).Thanks.
We purchased some Grandstream WP825 wireless phones to try to integrate with our CUCM 15.0 configuration. We've been running C7925 phones for years on older CUCM versions, and while we've had reasonably good luck with those, the audio quality just is...
I am labbing EVPN Point To Point VPWS for my CCNP SPCORE test and I was able make it work between two routers with IOS XR NCS540, but when I tried to do it between IOS XR and IOS XE the P2P comes up and I am able to see mac address on the local CE of...
As part of our ongoing global expansion, Cisco is launching additional data centers in the coming weeks and months. To support this growth, we are introducing new egress IPv4 address ranges for some of the new data centers. What’s Changing? We are e...
Hi CX Cloud Team! I’d like to suggest an important improvement for vulnerability management in CX Cloud. Currently, the way vulnerabilities are handled and displayed on the platform does not meet day-to-day needs well.I have to navigate through multi...
I'm trying to allow UPnP ( I know - bad, don't do it, unsafe blah blah) on a single vlan dedicated to gaming. I've got a pfsense firewall with upnp enabled handling all traffic for this vlan to the internet. access switch (VLAN122) -> Core Switch ...
I am experiencing the issue described in CSCwo61235 in the field. My deployment uses this Cisco kit pro as a standalone Microsoft Teams Room and it is not registered to Webex Control Hub. As a result, I am unable to access or download the software re...
Hi team i have a problema to relaunch the Network Services Orchestrator 6.4.44 days ago i launched succesfully this service but now i want to work again with the NSO but i have this problem when i try to relaunch for 2 more days:Something went wrong....
I am experiencing the issue described in CSCwo61235 in the field, but my device is not registered to Webex Control Hub and is instead used as a standalone Microsoft Teams Room. Because of this, I am unable to access or pull down the necessary softwar...
Hey there...I hope there are wealth of experts here. I have a need of your opinion with the below configuration that I created with help of several references and google search results.Here's the project:We have an appliance that is ON_PREM (35.35.3...
I am currently running Cisco ISE version 3.4 and encountering an issue while trying to create or edit an authorization policy. Specifically, when I click on the arrow under the View column in the policy set, nothing happens. The expected behavior is ...
I am trying to determine PoE budget for a planned project. When looking through our 3650 switches the 'show power inline' looks to compute the used and remaining power based on the power reserved for each port. However when looking at the 'show pow...
The FTD's (managed by FMC) used to drop traffic all the time when doing policy deploys. But it seems to be better in 7.x.We have some critical network traffic flowing through the firewall. At times we do see traffic disrupted during policy deploys. I...
I am wanting to set up a lab to set up and run python scripts for learning purposes. I have tried this a few times but want to ask the community if there is a Best or recommended node to use to push the scripts to switches and routers. If this is too...
Hello,I have installed Cisco ISE 3.4.0.163 and used only Entra ID, but I encountered a problem. Could you please provide me with some solutions?Event5434 Starting suppression mode for the endpointFailure Reason12976 EAP-TTLS authentication failedEAP-...
