Hi !I'm using the DVI-->HDMI connector to connect HDMI inputs on my MX300, is there a way to create an additional HDMI input so I can rotate between 2 sources ? perhaps any way to convert the output into an input ? Thanks! Gabby
Hi !I'm using the DVI-->HDMI connector to connect HDMI inputs on my MX300, is there a way to create an additional HDMI input so I can rotate between 2 sources ? perhaps any way to convert the output into an input ? Thanks! Gabby
Hi There !I'm trying to to use the MX300 with Apple TV and/or chromecast and am encountering the following problem:1) Chromecast, not detected on DVI Input2) Apple TV - Cannot play content due to HCDP error. Anyone have experience with this ? Thanks ...
Hi all,I have the follow situation:1. TMS Server in the DMZ2. VCS Control in DMZ, TMS agent replication Movi user with TMS3. VCS Expressway in the Public Internet4. MOVI User authenticate via Active Directory5. EX90 behind Firewall (Home User)7. EX90...
I have a CUCM-integrated C40 in a DMZ. It works great for internal calls to other phones on the system. However, when I try to dial an IP address, I get an almost immediate "call failed" and the firewall logs imply that it is actually trying to com...
Hi,I want to start a manual recording from end points during a conference call on MCU.For example 3-4 participants are on same MCU conference room and need to start recording this conference. Is this possible to start a recording from an enpoint duri...
Hi, We have around 7 CTS 3000 (Registered on CUCM) and 8 VC SX20 (Registered on VCS). Whenever we have a collaborative conference using CTMS while sharing the content flicker is observed on far end site. Irrespective of whoever is sharing, far end si...
Hi All Video Expert,I'm facing a problem the call out display id issue.(Domain: abc.com) TP endpoint H323 reg. (H323 address: 1184@abc.com with H323 ID: 1184) to VCS-C --- VCS-E >>>> Internet <<<< (Domain: xqyz.com) VCS-E --- VCS-C --- CUCM --- reg. ...
Is Cisco 9971 capable of doing video calls? If so, then how it would call any other party?
Good morning all,I am hoping someone can help with this. Sorry for the possibly simple issue here. But, I have a user I just built in Cisco TMS and they're unable to sign in. I've tried signing in as them on my own Jabber/Movi client and I still have...
I am implementing Telepresence Server 4.1. I am at the point of installing FEATURE license.I have the PAK code for the licenses. When I try and claim licenses, I am required to put in the VIRTUAL Serial number of the TS server.From GUI and from SHO...
I know i can do BE6K redundancy.how about TCS, TMS, and MCU??Is it possible to make redundacy on TCS, TMS, and MCU???
Hello,Is anyone familiar with resetting the admin password for this endpoint? I believe the process is to take note of the option and bandwidth keys then hold the speaker button on the front as the unit powers on? Thanks!!
We are struggleing to get our VCS and TMS talking again. Looking at various logs we have decided that there is a problem with the OpenDS component. Running a Diagnostic against the local agent seems to confirm this.If OpenDS is not...
Running Ex90 TC 6.0 and problem is when dialing PTP call connects good audio but no video. When the call is to a Bridge good audio and video ??Any ideas.Have looked at changing the MTU size to 1280 from 1500 which has corrected this issue in the pas...
Hello Community Team, We are deploying an MX 700 Endpoints, TC7.3.2 version registered with CUCM 10.5.2. The MX has an ISDN link configured on it. However each time the endpoint is restarted, it lost the IPV6 configuration which is mandatory for the ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-04-2024 06:27 AM | ||
10-04-2024 06:18 AM | ||
10-02-2024 07:36 PM | ||
10-02-2024 06:18 PM | ||
10-01-2024 08:17 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |