TelePresence and Video Infrastructure

Dear all,We have sucessfully paired the SX 20 TC 6.0 with ISDN Link IL 1.1, and mapped with Public IP.Here is the detail,The connection is like this WAN <--> ISDN Link <--> SX20Sx 20 IP: 192.168.30.190SM: 255.255.255.0GW: 192.168.30.1ISDN LinkIP"192....

We see the Scheduled conferences are not being created on time in 1 MCU and see that the TMS is showing "Creating" for that conference.For the conferences which has to end, TMS is showing Terminating.It looks the API messages from TMS are not handled...

Our client has VCSC,MCU with Profile, C90, EX, MXP's registered across the different sites, now they are going to implement security on their network.What are the consideration to be taken on the Protocols and ports. All the endpoints and MCU are reg...

Hello, I am trying to find out what is the maximum input resolution that will be accepted by an SX-20 version TC-6 with a DVI to VGA cable. So far, my own system accepts a max of 1366X768 (Version TC5.1.7) and my customer says his goes to a max of 14...

I have several Tandberg/Cisco C40 codecs with TC 4.2.0 version software. These codecs will randomly reboot themselves. I have not noticed an fluctuation in power and they are all on UPS and power conditioners. I have found no discernible pattern to t...

I'm looking for some current documentation on installing certificates on EX90's that are internet facing and will register to a VCS-Expressway. These EX90s need to be able to call other internete facing devices such as Movi and Jabber Tablets, as wel...

     I have configured QoS and have assigned the Dscp marking to both the input and output priority queues. My question is, if the traffic I am marking is going into the priority queues, is there any need for me to reserve any bandwidth? If its in th...

Hi All,I have been struggling to write this question so bear with me. We have tried many different  types of searching through using a single default zone with transforms,  to using multiple subzone and specific search rules, however, I cannot  seem ...

Could you please explain what is the difference between LIC-MOVI-XX and LIC-JAB-MOB-XX ?Thanks.

Hi Guys,We are just starting to deploy EX90 units and were wondering if we should leave these units on all the time (in standby during the night) or shut them down completely during the night?What are other people doing?Thanks,Jeroen

Hi there,is there an issue with TC6.1 endpoints and multiway (Conference Factory)? I try multiway between ex60 (6.1), sx20 (6.1) and jabbermovi (4.6) but multiway is only working on the jabber client. Putting them together on the ex60 or sx20 does no...

I am looking for information on how I can design either a policy/search rule or a configuration to provide a limited amount of our external customers the ability to dial into our network via SIP. We have a VCS-E(Cluster of 2) sitting in the DMZ with ...