TelePresence and Video Infrastructure

I have an SX-80 codec. I am trying to integrate a Screenbeam 1100 into the system and have the Cisco camera be usable through the Screenbeam. Does anyone know what the 2 USB ports that are on the rear panel of the SX-80 are used for?

hello,we have a few modular rooms that require the cable for the table microphones (CS-MIC-TABLE-J) connected to a room kit plus, longer than 15m, hence the mic cable + one extender are not sufficient.what is the recommended solution? can we daisy ch...

Hello, Is it possible to schedule a session at Room Navigator Wall Mount like Ad hot meeting?Is it possible to schedule a session at Room Navigator Wall Mount like Ad hot meeting? Thanks    Santiago

Hi, everyone! I'm quite new to using the rooms API, so, what I'm asking may sound easy to you. Here's what I'm struggling with: - Send customized alert to the rooms using xCommand UserInterface Message Alert Display.  I'd like to have a way to quickl...

we have SSO setup for MRA , Azure as the IDP, on Azure we have MFA polices too, but SSO seems to be only supported with UC requests, not admins, is there a way we can have SSO with MFA for admins on expressways, or any third party tool that can do it...

I configured a CMS Edge to provide turn services as follow: private IP: 10.1.7.41 public IP: 41.1.1.41 I followed the deployment guide 3.6 scalability and resilience and I entered the following commands on the Turn server correctly: turn short_term_c...

                 - FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72542.html  M.

My cisco codec pro is regesteres on my cucm 12. I'm using the existing SIP trunk base in two differents countries, we can make calls without any problem but now i need to establish telepresence video using the same sip trunk but it fails Disconnect c...

Hi Does anyone know which driver I could install to use a PrecisionHD 1080p 4x as a webcam? Windows detects it as an USB video camera but I can't get the video stream from it. I know it's probably an unsupported feature, but maybe someone has a clue!...

Hello!I have an interesting situation to discuss with you guys and galls.Previously we had 2 Call Bridge clusters with 2 different CMM-s managing those clusters. All clusters and CMM-s were on version 3.3.Now we decided to upgrade all our clusters to...

We have a Cisco MX800 which has developed a screen fault, it went intermittently and has now gone as per attached image.Anyone got any spares...

Hello everyone, I'd like to know if there's a way to register a room kit such as: Webex room kit mini, Webex Room kit Plus, TP SX20, SX10, etc.... to CUCM Server using SIP and call from endpoint to Zoom or Webex calls. Today, i have a customer that r...

The audio loop delay detected is at least: 190 ms. There seems to be an audio delay introduced by the external equipment connected to the TelePresence device. This may reduce the quality of your TelePresence experience. Example: If an output TV/monit...