Unified Communications Infrastructure

Resolved! CUEAC 8.5 & UC Manager 8.0 compatibility

Hello,I'm planning to install UC Manager 8.0(3a)su1 with CUEAC 8.5.The release notes for CUEAC 8.5.1.5 are fairly specific.CUEAC Version 8.5.1.5UC Manager Version 8.0 & 8.0(2C)Does this mean my later version of 8.0(3a)su1 is not su...

Usermigration between Clusters?

Challenge:We would like to migrate users from existing clusters (CUCM rel. 4.x /5.x/6.x) to a another cluster to consilidate all user.How can we achieve this regarding licenses files?Many thanksAugust

UCM CTI RP / Unity Alt Ext

I am creating an auto attendant for a dept with 60 employees. The auto attendant will send callers to an extension that is the employees alternate Unity voicemail extension.The company does not want the employees phones ringing which is why I am sen...

3 and 3 upgrade for VT-Advantage

I have a customer who has 326 existing IP Phones (Combinations of 7912G, 7945G with VT Advantage, 7985G) and also existing 3515 MCU. So please let me know whether 3*3 upgrade is also sufficient for the video users.

Cannot access CME from CUE...

I for some reason can no longer access the cme from the cue web ui. I get logged into the web ui but that is it. When I tey to access anyting is just hangs like this:

Resolved! How to back to Calling VM after a forward with Unity Connection 8?

Hi I want to do the following:If I call tu DN 1000 and if DN 1000 CFB or CFNA to 2000 the call forwards to DN 2000, then if DN 2000 no answer the call goes back to the 1000 VM box.I remember I did it but with Unity 4 or 5 but with Unity Connection I ...

Permenantly change spell by name to extension toggling in Unity 8.0

I'm curious to know if it's possible to permenantly change the toggling between spell by name and extension when forwarding a voicemail to another user within Unity 8.0.I want the option to forward to an extension only.Can this be done? Has it been d...

Resolved! Unity/AD/Exchange change

Our company ( X) has recently been acquired. The Purchasing company ( Y) wants our emial addresses chnage the day of close. They want it to go from jdoe@xxx.com to john.doe@yyy.com . Our AD alias will remain the same. Our unity server forwards to o...

Resolved! Unity Connection 7.1.2.31900-1 A/A Publisher "Not Functioning"

Hello all,Just wondering if anyone has seen this type of issue and perhaps any resolution Our A/A setup has been working well until yesterday, the Publisher was acting as Primaryand Sub was Secondary all of a sudden users started to complain that the...

Bi-directional Hotline

I have created a hotline that is bi-directional and it works fine. It is connected to a VG224 and has a DN associated to the port. I then have a css that has a translation pattern point the analog phone to another number with a urgent priority. All w...

Resolved! Cisco Unity Connection OCN and LRD

Hi,I have a problem with CUCM 6 and Unity Connection 7. I have a PA looking after 5 managers. On the PAs phone I have each managers line mapped to a button on her phone. If someone rings the manager the PA's phone will flash. If the manager doesn't a...

Resolved! Unity Connection 7.1.3 - Skip Greeting

Is there a way that when User A calls User B dn and User B greeting plays that User A can press a button to skip the greeting and go directly to leaving a message?Thanks in advance for your response.

Resolved! SIP Trunk with PRI Failover

Hi,I'm planning to put a cisco callmanager together with a Cisco 2921 with CUBE and a SIP trunk used as primary voice trunk.I'll then have an ISDN acting as back-up for the SIP trunk --> if SIP is not available, calls will be re routed on the ISDN.Is...

CME/SRST 8.0 and 9951 video !

Hi all experts.Someone pls tell me that does CME/SRST v8.0 supports 9951 ip phone and its video capabilities ? i am mainly interested in SRST v8 so pls tell me.

Pre-recorded message then hangup

Hello,I am looking at one of our numbers and would like to have the ability to set a recorded message to play when the number is called. Then at the end of the recorded message to hand up.Is there a way to do this from Call Manager 7? Or will I have ...

Unified Communications Infrastructure

Forum Posts

Resolved! CUEAC 8.5 & UC Manager 8.0 compatibility

Usermigration between Clusters?

UCM CTI RP / Unity Alt Ext

3 and 3 upgrade for VT-Advantage

Cannot access CME from CUE...

Resolved! How to back to Calling VM after a forward with Unity Connection 8?

Permenantly change spell by name to extension toggling in Unity 8.0

Resolved! Unity/AD/Exchange change

Resolved! Unity Connection 7.1.2.31900-1 A/A Publisher "Not Functioning"

Bi-directional Hotline

Resolved! Cisco Unity Connection OCN and LRD

Resolved! Unity Connection 7.1.3 - Skip Greeting

Resolved! SIP Trunk with PRI Failover

CME/SRST 8.0 and 9951 video !

Pre-recorded message then hangup

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Caller ID disappear with Enhanced Line mode

Automated call to validate information via caller input

Jabber Persistent chat Hidden users

CUCM Smart Licensing offline error

CUCM Alert LowActivePartitionAvailableDiskSpace

Changing Domain on CUCU, Unity, IM&P and Expressways C/E

Cisco ATA 191 unregistered

CICM V10.5

CUCM Upgrade

CUC and Expressway-C/E Resizing