CUCM 12.5.1.17900-64Is there a way to restrict a phone to only allow a specific login User ID?I need to prevent erroneous logins with the same ID across a complex mobility environment.Thank you in advance.
Forum Posts
Hello. I have the following issue:If 2 phones are unlocked, messages between them come instantly. But when 1 of the phones has been locked for 15 minutes or more, upon sending a message to it, the push notification with this message comes with a dela...
I have InformaCast (v.9.0.1) and cucm v.10 running on my environment but when I make a broadcast to an active phone , the broadcast is sent to the headset. Is there a way or hack to have all InformaCast audio broadcasts' played only on the speaker...
Resolved! Unity Connection - COBRAS Hot Hode
Is COBRAS Still supported/working?Looking to do a migration from 12.5 to 15 and would like to use hot mode if it is still possible.
Hi all I have a problem which when I call the operator sometimes I can reach the operator and sometimes I cannot reach the operator. What troubleshoot I can make to resolve this issue. Thanks
Good day.I have a CUCM that has a SIP trunk to PSTN/ITSP and another SIP Trunk to Asterisk. A user on Asterisk is suppose to make a call to PSTN via CUCM. As soon as the called party answers the call disconnects. Codecs are the same along the call le...
Hi, We wanted to record the voice communication happening over the CUCM server (acting as a SIP server for all phones) to external voice recorder. For this we have place C8200 series router with the cube licenses. Can you please help me with the conf...
Hi, The ISP provider informed us fraud calls were coming from our auto-attendant 800 number. Is there a way to block international calls in CUC? I found some information informing of the CUC restriction tables but it seems the numbers will have to b...
Does anyone have any real world impressions of the latest release? We have new servers coming and originally intended to deploy Version 14. The project was delayed and with version 15 released they are now recommending we go that route. I think on pa...
Resolved! DNS does not resolve on Expressway C
Hello, I'm setting up Expressway E & C for MRA. My traversal zone fails and I see the error 'SIP Failed: DNS resolution failed' When I use the DNS Lookup tool to resolve the fqdn of the expressway E, indeed it fails. When I add a 2nd server, like 8...
We are about to deploy new servers and trying to decide to pull the trigger on Ver 15 or go with Ver 14. Cisco is recommending Ver 15, and I don't want to do the upgrade to 15 in 12 months or so either. If it's not stable it's not worth deploying tho...
HiI have CUCM 8.5Is it possible to configure one number XXXX so when I dial number XXXX I call many user(predefined group of user) simultaneously ?Regards
Hello All, Can you help please me to fix a jabber issue? The customer recently upgraded the jabber from 12.0.X to 14.0.X, CUCM and IM&P version is 12.5 which is compactable with jabber 14.0.X as per Cisco CSR. But whenever the user is login into the ...
Resolved! Clarification on Cube HA Configuration
I need clarification on whether Cube HA(Cube box - to – box redundancy) CUBE14-T-ENH is mandatory or not. Can we implement Cube HA with the following BoM? 3.0 ISR4331-V/K9 - Cisco ISR 4331 UC Bundle, PVDM4-32, UC License --- 209 7,062.00 ...
I have observed an issue with delay and RTP stream interruption during a third incoming call from PSTN, whether directed to UCCX or an IP phone.here is the log and the capture.
