Greetings,Recently I deployed two S3260 storage servers, provisioned LUNs and and now need to resize a data LUN. I'm reading through configuration guide under the "Storage Profiles" subsection. It seems the resizing of LUNs is not supported, or maybe...
Forum Posts
Resolved! Rename Service Profile in UCS
I'd like to rename our UCS service profiles. They are in use for production ESX hosts, so I'm worried about downtime. Can I rename them without affecting production? Is there any downtime associated with renaming them?
Hi This is the first time we are trying to install Windows 2016 on M200 M4. We mentioned CD / DVD as 1st Boot device and with virtual media policy mentioned the iso local path from where we access the KVM console and also tried mentioning remote p...
Hello Everyone. I am using UCSC-C220 but I have a booting problem. I checked HDD from CIMC I think, there is no fault from Hardware. Could Raid Setting be reason of this kind of problem? Also, I could not fine Raid Controller in Booting ...
Resolved! UCS C210 Firmware
When I attempt to upgrade the firmware via TFTP I get an Image_CRC_Failure error message on both the web and CLI. I have tried re-downloading the image and I have tried multiple image versions. I have also tried upgrading via the web and I get to 5...
Hi all, I'm having a hard time explaining some behavior that I'm seeing on a new UCS Mini, and was hoping one of the experts here would be willing to share some insight. Sorry for no diagram, but this is a new system and we have a pretty simple t...
DearPlease help me with a topic I am trying to update the firmware of a UCS 5108 that is currently in version 3.1 (1e) and leave it in version 3.2 (1d) wanted to know if it is convincing to do the update directly or first update to the next version
Hello, I try to deploy ESX5.5, ESX 6.0 or ESX 6.5 on UCS-E140S-M2 in ISR4451. I succeed to deploy the iso file by the KVM. AFter ther first reboot, I need to configure the ESXi IP adress to deploy the OVA and manage it. During this first reboot, the...
Hi I am super frustrated with our FlexPod and Cisco at the moment so I am reaching out, hopefully some expert can spot the issue. I have had a TAC open with them for almost 2 months now and it seems no one knows much about this stuff, but they tell ...
With Haseeb Niazi and Chris O'Brien Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Single-Site and Multisite FlexPod Infrastructure with experts Haseeb Niazi and Chris O'Br...
we have a problem connecting a new UCS system to Nexus 5K Switches.Our main Problem ist that no traffic from UCS System is show on Nexus Switch. I made a bare metal installation of VMWARE 6.5. on one blade and try to ping the VMNIC 0 IP from outside ...
Resolved! UCS Blades - Integration Question
We have a couple UCS B200 M2 blades that we would like to add to another 5108 Chassis. The Chassis is currently running 3.1 (2b), the existing blades (B200 M3/M4) are running 3.1(22a) and the Fabric Interconnects (UCS 6296UP) are running 5.0(3)N2(3...
i am getting error upgrading server firmware 2.2(5) to 3.2(1) sys/chassis-1/blade-5(FSM:sam:dme:ComputePhysicalAssociate). Remote-Invocation-Error: BIOS Update Failed: Unable to flash new BIOS Image any idea?
Does anyone know if the Qlogic QLE-2694 Fiber channel adapter is supported in the UCS240 M3 SFF?
Hello, Does Fabric Interconnect 6100 series support Dis-joint layer 2 configuration. As far as my understanding it has nothing to do with hardware, it is related to code that is running on the FIs. I have 2.x code running on FIs (6120s). Please let...
