Unified Computing System Discussions

the viewer has terminated. Reason the network has been droppedTaken following actionSelected service profile> on right pane selected server tabThen selected recover server in action menuexecuted reset CIMC and chekced not workedthen executed reset KV...

Hi, I have ucs 2.2.6e. And we hyper v win 2012 R2 on the hosts we create a Windows VM with 2 network ports and 2 fiber channel ports then we successfully map a LUN to the VM after zoning the VM pwwn with the storage Now we need to do the same with...

Hello everyone,someone know if is able the Cisco UCS CNA M61KR-I Intel Converged Network Adapter to support uncompressed I/O – 2022-6/7?Thanks a lot in advanceRoberto Loiudice

Dear all, we're deploying a new Flexpod system which is composed of Netapp FAS 2554 filler, cisco nexus 5548UP fabric switch and 5108 UCS blade chassis having two 460 series blade servers. but when we connect the nexus 5548UP ports configured to oper...

Hello.  We currently have about 12 Cisco UCS C210 M2's in production and about once a week recently have seen a disk with either a "Predictive Failure" or completely failed.  Are there any known issues with this model and failing disks?  I've seen th...

Hi, I have a cisco ucsc-c220-M3 server and i could not find out the model of its motherboard.Could you please help me to find the same. Thanks in advance, Jesilraj VP

Hi, i have any problem with a C220 M4 Server. I configured the CISCO 12 G SAS MODULAR RAID CONTROLER with one virtual drive in RAID 5 (boot true). After in the bios i enabled [HBA] on the OPROM module But when i launch the installation of WINDOWS 20...

*Model : CISCO UCS C220 M3  Our C220 is configured RAID 0 (1 HDD) volume of LSI Software RAID. Unfortunately, C220 is suddenly reboot in using. After that, LSI Software RAID disk status changed to "READY" from "ONLINE". SO, We updated latest firmwar...

Hi, I need to know the level of redundancy between the servers in the blade If I have Hyper-V cluster on the 8-servers in a chassis. And there are some VMs created on these servers. Then If I shutdown one server. Are the VMs will move automatically ...

Hi Guys, I got this message on my chassis, can you advise what this means and how can it be cleared:     sys/chassis-1/blade-2/mgmt./log-SEL-0 capacity is very low.