I was unable to set the following command in version 7.1.x of the ASR9901.I was able to configure it in version 7.0.x. How do I enable it?
RP/0/RSP0/CPU0:router(config)#multicast-routing^% Invalid input detected at '^' marker.
RP/0/RSP0/CPU0:router...
Hello We have NCS5504 with IOS XR 6.5.3, and change the optics from QSFP-4X10G-LR-S to QSFP-100G-LR4-S and the port keep in FortyGigE how to change to HundredGigE?.
Hi:
Found follow description at https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/vpn/76x/b-l2vpn-cg-ncs5500-76x/configure-virtual-LANs-in-layer-2-VPNs.html
Following limitations are applicable to both outer and inner VLAN ranges:
32 unique VLAN ra...
On the ASR 9903, there is a "breakout" port, for lack of a better word on my part, where you can use HundredGigE0/0/0/10 or TenGigE0/0/0/26-35. At the moment, I can configure the Te interfaces, but am trying to configure Hu0/0/0/10 for service inste...
Hello friends. It's my first post here, so forgive me for any misunderstandings. I have some 9006 equipment on my network, with two rsp440-tr (typhoon), one of which is always active and the other in standby. As I use generation 2 cards (2x100GE-TR),...
Hello
we havePID: NCS-55A2-MOD-S Cisco and i want to upgrade IOSXR
so please i need from expert IOS XR help me about the steps to upgrade NCS 55A2 Cisco
version actual
RP/0/RP0/CPU0:NCS-55A2-Mzl-Jemil#show versFri Jul 1 10:49:10.438 UTCCi...
Hi
When I insert an A9K-MPA-8X10GE linecard into an ASR9010 I get the following error:
shelfmgr [416]:% PLATFORM-SHELFMGR-6-NODE_STATE_CHANGE: 0/1/1 UNKNOWN state: UNPOWERED
I have tried with two different linecard and I get the same error. Any...
Hallo, in order to upgrade from IOS XR 6.6.3(64-bit) to 7.5.2 i have to changemax-metric router-lsa for ospf RP/0/RSP0/CPU0# configureRP/0/RSP0/CPU0(config)#router ospf xxxxxRP/0/RSP0/CPU0(config-ospf)#max-metric router-lsaRP/0/RSP0/CPU0(config-ospf)...
Hello everyone, I have a requirement where it would be "ideal" to have both xconnects (current and to-be) up at the same time. I am not 100% sure on how possible this is but from my understanding it will cause issues. Current setup:R1 --> Core-router...
How much does Card A9K-RSP5-TR have bandwidth?What is the normal asr9006 air break speed range?What is router ASR9006's MAX CPU and MAX Memory and what should not exceed?
We have a collection of 9006's with RSP-440's running 6.4.2 Classic. We'll be upgrading these boxes to RSP-880's with some MOD-200's to support our 100G links using the MPA-1X100G's. Some documentation on the CPAK's indicates we need to upgrade to ...
Hallo, I am upgrading from 6.6.3 to 7.5.2(64-bit) on an ASR 9904; i order to do so, i have to build a tar file with mini iso image and rpms. Where can i find the checksums for the individual rpm´s on cisco´s websites ?For instance:liebchen@$ md5sum ...
