Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All,we have UC applications which all running on UCS B Servers. All the VM's are hosted in SAN environment.In this case what's the recommend method to migrate UC VM's Blade A to Blade B. Thanks in Advance !!!
Hi.. i have come to know that CME does not support SIP INFO DTMF method. It supports only Notify and RTP-nte with SCCP phones.CME currently supports this DTMF internetworking for SIP to SCCP calls:* SCCP out-of-band-SIP Notify / RFC2833 since 12.4...
Hi all,The topology is like this: TELECOM OPERATOR<------>CUBE<------------->CUCM<----------->AVAYA IP PBX When a CUCM user, calls GSM mobile phone thru th TELECOM OPERATOR and transfer this call to Avaya phone set, the call drops...All trunks ...
Hi I have a need to have a one to one mapping between a SIP client and a FXO POTS line. ( times 8) i.e. An incoming call on the FXO always rings the same SIP client (which is a softphone on a PC) and any call from that SIP client always uses the same...
Hello!I am trying to configure my CME with SIP trunk. My outgoing calls work fine, but i have problems with an incomming calls. When i call from my mobile, the extention behind CME ring....but there is no voice.Thanks in advanced.
Dear Sir, I am having an issue for my wireless Phone. Getting this error. ephone-dn 21 dual-line number 130 label Engr. Aied name Engr. Aied shared-line sip - Invalid input detected Thanks & best regards,Kael
Dear Sir, I am having an issue for my wireless Phone. Getting this error. My Boss want to shared a line to 9951 Telephone using his wireless Telephone. Cisco 7925G WirelessIP Telephoneephone-dn 21 dual-line number 130 label Engr. Aied name Engr. Ai...
Hello! I am trying to test the 8811 and 8841 model phones in my Call Manager environment but the phones will not register. They just sit with the message on the screen of "Phone is registering".I am running CUCM v9.1.2.11900-12 with DevPack v9.1.2.14...
I want to enable web access for all IP Phones.Only 3905 and 8831 IP Phones web access pages are working and some of the 8945.9951, 7821, and 8761 all are not working.I've checked every phone configuration, common phone profile, and enterprise phone c...
Hi All,We have centralised call processing model with SRST as a fallback method. In one of the branch few third party providers running their own telephony system and would like to integrate with us for calls to be routed internally.I have been debat...
Hi, We have international dialing facility on our CTS but for this we have to use CLI of CTS for special characters like # , @ and IP dialing facility (X.X.X.X) is not available on IP Phone 7975 interface. Is there any possibility to achieve the IP d...
Hi, I have a 2811 running CME 8.6. In it is a VIC2-2FXO. This connects to a POTS line. On the CME are a few 7940, 7960, 7970, 7912, 7905, 7906. (About 10 phones total) (Site A)We have a remote office (Site B) which has a phone line in with a differen...
Hi thereI'm facing the following problem:CME 8.6 (ipvoice-mz.151-4.M10.bin) with a SIP trunk box behind an ASA (8.2.5).CME -> Patton-SN5300 SIP provider box -> Cisco ASA -> SIP-Provider.Problem:I have no audio when an external incoming call to an int...
Dear Experts.I wiuld like to upgrade the firmware of ucs210 servers. which has been recently uograded to cucm 10.5. would the new cimc and bios upgrade effect the cucm configuration?.RegardAli
I have new 8845 video phone connected to BE6000 ver 10.5.1have uploaded required firmware.I can see the file in tftp server , but does not show under firmware tab on CUCMrebooted the server, Phones gets IP info , TFTP info properly but does not loada...
