Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
My CUCM is at version 12.5.I want to be able to change the "Alert-Info" message for some CUCM extensions. When they ring a third party device I want to be able to change the incoming ringing pattern via this phone. The only way to do this is to monit...
Hello,I'm running CUCM 11.5 and I have a CP-8841 phone that is being re-assigned to a user.The cluster is 1PUB/3SUBs with a CUCM Group set to auto-register.The phone in question will register in CUCM with an auto-registered DN , an IP Address in the ...
Hi Guys!!!!I try to configure voice command under a privilege level. With others commands I don´t have problems, to configure with a privilege level, but command suchs , (id mac, busy trigger per button,voice-class codec 1) is imposible to me. I exp...
I am trying to integrate my local gateway with the webex, however the gateway is not registering :Sip debug shows that registration is not authorized:your help will be appriciated.show and debug outputs are attached:
Hello,I have a CISCO 8861 that requires an activation code. I inserted several codes but I still get the error message "invalid activation code".I entered the last code on another handset and it took directly, but on the CISCO 8861, it always gave me...
Hi, I have a site that is interested in migrating form CUCM to Webex Calling, I know the the phones need to be in v2 or higher but I wanted to ask if there's a tool where I can export this information. Thanks
Hello, I am replacing a VG224 with an ATA 191 since the VG is EOL and we hardly have an ports in use. I am running into an issue with our paging system (Bogen PCM TIM/Bogen TPU 100-B) When hooked up to the VG, it works perfectly, it instantly picks ...
Hi, We have upgraded Cisco Dect base station 210 firmware to 4.8.1 (DBS-210-3PC_v0480_b0012). After the upgrade, we are unable to log in with the default admin account (admin/admin). We are able to log in with user account. Is there any changes in ne...
We have upgraded Cisco Dect base station 210 firmware to 5.0.1. After the upgrade, we are unable to log in with the default admin or user account. I tried all combinations: admin/adminuser/adminadmin/"MACaddres on lowercase"user/"MACaddres on lowerc...
This is my first time integrating on-prem CUCM with MS Teams. Your assistance with this issue will be appreciated.The SIP Trunk between the two systems is up and active; however, users on both systems cannot call each other.MS TEAMS:user's number: +1...
Hello Team, I have this situation: 1- Already, I have one sip trunk between two cucm, but I have incoming CSS to reach specific extensions (Ex: receptionist) but this CSS can't reach other extensions like the Boss extension. 2- My idea to maintain ...
I install CUCM 14 cluster .I config SSO in the cluster with my windows 2016 ADFS. Now when i enable the SSO , when i test the user ,i get this response: Return URL: https://cucmpub-a.XXX.com:8443/ssosp/webapprelay HTTP Status 403 – Access to the requ...
Jabber audio issue on conference calls.User making the conference call loses audio but the other parties can hear all parties.Jabber 14.1, CUCM 12.5
Hello, Im working with the cucm 12.5 and need to decrypt security password, I worked with this link for version 11.x and It works with no issue, but in the 12.5 we are not getting the file platformConfig we are only getting the file processnode. ht...
Hi, I am now trying to upgrade my Chem-8811-3PCC.But an error occurs and I can't upgrade!How can I fix it? help me
