Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a voice translation rule that reads:voice-translation-rule 2rule 1 /.*/ /5415489400/This basically is applied to all outbound calls so that all callers see our main number and it works great. However, I have one internal extension that I need...
Hello guys!Hope you are doing fine. I would like to know if there is a way to configure two different auto-attendants in Unity 8.6.2, I mean, I want to have two different auto-attendants with different scripts for 2 different directory numbers at the...
Running into an issue sending an inbound SIP PSTN call from the CUBE to the Call Manager, have setup per provider docs but the call is failing with a SIP/2.0 404 Not Found, not sure if it cannot find the SIP trunk to Call Manager or if its a config ...
Hi expert Q1 : did end user can get permissions to hear and view its phone records and not the all org ? Q2 : i have a difficulty to configure records sx-20 .did someone have a link for that ? thk sharon
I am trying to route an unsolicited SIP Notify for MWI from CUCM 7.1.5 via a Cube gateway running 15.1.4M7 to a CUCM running 10.0.1.This is not working. SIP calls to phones and Unity Connection work fine over this link.Also, I can send the MWI over e...
I am trying to Set Up 4 Cisco IP 7960 phones in a new office, and can not unlock current network configuration without password. Admin is gone and password is unknown. Can I get around this?
Dears,we have a background image on all ip phones. Now i dont want users to change the backgroud, how i can restrict users to not change background on their phones. Thanks
in jabber if a user searches for a contacts and tries to call that person it fails, obviously since the number does not have the 9 and if it is long distance does not have the 9 & 1 in front of the number. is there anything in call manager we can do ...
I have connected a Cisco 2901 CME Gateway to a T-1 link through a VWIC3-1MFT-T1/E1This is my configuration for channel 1 ds0-group 0 timeslots 1 type e&m-immediate-start dial-peer voice 1001 potscorlist outgoing port1service defaultdestination-patte...
I have plugged in a CP-CKEM-C to a 9500 IP Phone, as an expansion module. The module comes up but it doesn show on the phone. I guess it is due to the load file but i cannot find this load file anywhere in cisco. Please help.
I'm attempting to disable the pc port on all of our common area phones using the a common phone profile (CPP), however, the ports are not shutting down. I've applied the CPP to the phone, and other options within the CPP, such as disabling access to ...
Hello!Hopefully I'm posting this in the right section. If not, I apologize, and hope you can place it where it belongs. :)Anyway, we've had this happen twice in less than a week now, where our provider has some type of outage (they haven't been abl...
I have installed cmterm-88xx-sip.10-2-2-16.cop.sgn file on all Cisco Unified Communications Manager servers in the cluster.I have restarted the Cisco Tftp service on all Cisco Unified Communications Manager servers in the cluster.In the Cisco Unified...
Hello,I have two BE6000 servers which come with pre-built 10.5 CUCM, Unity Connection etc. machines.The servers shipped with CIMC 2.0(1b) and VMware 5.1.I upgraded these to CIMC 2.0(3d)1 and VMware 5.5 using Cisco'c custom ISO image ESXi-5.5.0-174601...
Have CallManagers at central site and an H323 gateway with PRI at remote site. All devices are registered to the Subscriber with Publisher as secondary. When remote site is on an active PRI and the SUB goes down, the call is preserved. However, if...
