Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dears need your helpnot able to dial the following no9 013 8322299 national callpls find the attached config
Hi,We have a scenario like below:IP Phone--(sccp)-->CUCM--(H323)-->CUBE--(sip)-->ITSPFor outbound calls, the call disconnects as soon any button is pressed during call. So basically, any DTMF digit dialed from the Phone disconnets the call.Here is th...
I have 3 BRIs on a 2911 connected to CUCM 8.6.2 via H323.Inbound calls work fine, but I get a busy tone when trying to dial out. Here's the output of debug voip ccapi inout:*Jan 25 07:07:51.559: //-1/001809BD0200/CCAPI/cc_api_display_ie_subfields: ...
Dears, I have this client that used to have a PBX and now switched to IP telephony with CUCM 9.xThe operator used to have a feature that allowed him to do a direct transfere between 2 external calls while he himself steps out of the call (No Conferan...
Hi guys,I try to set up a video call between 2 7985 phones over a SIP trunk. The SIP trunk is between 2 CMEs, one is Vers. 4.1 and the other one 8.6.Audio works but I get no video.If I do a video call on the LAN it works. The problem is somehow with ...
Hi allHave a little issue with a SIP-trunk from Optimum connected via CUBE to a Cisco CUCM 8.6.2Callflow: Provider SIP -> CUBE -> SIP -> CUCM -> SCCP phoneWhen inbound call is answered on the phone there is no audio either way. The odd part is when I...
Hello allI am facing technical difficulties when attempting restore of a cluster, the backup I am trying to restore is from a CUCM/IMP 9.1 cluster running on MCS,this installation is to be moved to new UCS serversThe MCS and USC clusters both have id...
Hello Everyone,I have correctly installed CUCM Pub and Sub version 9.1 on UCS c220 M3 server. No problem with cucm but when i login for Enterprise License Manager, it successfully logins but don't display any option; just blank page. I tried it with ...
I have 2 fractional T1s (16 B-Channels), 4 BRIs and a 2-port FXO (I only plan to use one). While adding the timeslots for the PRIs I ran out of DSPs so I had to steal some from XCode and CFB. I now have only 4 XCode, 1 CFB, and no MTP configured on...
Connecting via an ITSP and incoming calls are:ITSP--SIP Trunk-- MyCUBE--SIP Trunk--CUCM--IVR(CTI Ports and RPs) | ...
Is there a way to use a wav file recording as the standard greeting for a user mailbox as opposed to recording the greeting from an IP phone? Platform is Cisco Unity Express 3.0.Kind regards,CB
heyi have issue with a CALL MANAHER v9.1 after installation and rebooting, i trie to make some apply on phones but phones won't applis those changes;i trie to make a reset factory on phones but nothing work.phones show me the configuration before reb...
I have set an external number to call forward when a user is away from their desk phone. From an inside extension the forward works but when a call comes in from the PSTN and hits the line and then is rerouted to the external number it fails. Any i...
Hi all, I am having a weird issue with CUCM and CUC... I have a user, he can get extension to extension call.He can call outbound just fine( outbound to other extension and to PSTN). However, this user CANNOT RECEIVE calls from the PSTN! Whe...
I have a customer that has a custom CUE script that I am trying to edit. Right now the script plays through 3 times and then transfers the caller to the operator. What I am trying to do is change the script so that it only plays through once and then...
