Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello everyone!We have a CUCM 9 server installed, we need to add a subscriber, do we need any license for that? We are using ELM for licensesAnd would we need any license for the current IP Phones for subscriber?
We have many VG224s in production. Nearby lightning strikes kill ports on the VG224.The cabling has protection on it - from the old Western Electric 701 PBX. However, that switch delivers 52 volts at 39 milliamps, and the Cisco VG224 is much lower....
Dear all,Do you know where i can download (or use instead of) the latest version of UC ordering guide?Regards, Ahmet Hudai KOYUNCU CCNA Voice, CCNA Security
Hello there, We just did an upgrade from an older version of unity and call manager (4 to 9)There unity was tied to lotus notes. We are having an issues configuring the Viewmail for lotus notes client. we are using the following installation guide...
I have a fairly new setup with CUCM and CUC running 9.1 version. Calls are going to the CUBE via SIP trunk from the provider, then they get sent via another SIP trunk to the CUCM, which then forwards it to the Call Handler in CUC (for business hours ...
Hello,I configure a CUCM & IM presence and Unity Connection V9.1.Jabber for windows is good for all (directory, voice mail,softphone,) but i can't conect with my deskphone 8941.uc service OK on CUCM ,okgateway on IM presence OK.End user with role Xfe...
Hello there.We currently have a project for 21 sites running CME and a central site also running CME. I have read that it is ideal to have a gatekeeper if you already have many remote branches. Can you suggest an appropriate router model for the gate...
With Justin Dew Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about integrating Cisco Unity Connection into your environment and troubleshooting the many features tha...
Hi guys.I ran into some issues with one of our brach sites where all outgoing calls fail.We use a standard config across all brach sites wiht MGCP gateways, and works perfectly except this one site.It used to work and recently had some power failures...
We have a Panasonic NCP500 PBX and are interested in configuring 8945 phones as 3rd Party SIP Extensions. Is this possible? And if so, how would we configure each phone to find the PBX IP Address and username and password? Thank you.
I'm facing an issue where user moved from another cube (which was working as normal) to new cube user get no missed call notification displayed on the phone (7942 phone). I then swap a 7945 for user - experienced same issue. however- when user login ...
Hi guys.We have a current requirement that has the following specifications.Minimum of 20 Analog trunks, 1 x E1 PRI ISDN trunk, with SIP license (60 licenses), with IVR, call data recordingI have configured a 2911 with the appropriate licenses in CCW...
Hi there, Just a general discussion on restoring the backup file. I have PUB VMware image back to June 2013, and from July to now we have scheduled backup every month on PUB. If let's say system crushed and I have to rebuilt the PUB from June ima...
hitwo cucm are running in network as publisher and subscriber with 7.1.how can a ip phone will add to sub when there is no pub(dead).the sub with out pub will be a read only. so please tell me how to over comethanks.
Hello guys!I´m having a problem with de caller ID on the ip phones, I have setup a callmanager express 9 on my branch office and I have a callmanager 9.1 in the central office. The CME is added on callmanager as H323 gateway. the "The display ...
