Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I understand that the license will have to be regenerated in case of IP address change of cucm.But how about if I only change the netmask with ip unchanged '?Do I still need to regenerate the license and reinstall it?Thanks!
SIP CiscoTelepresence EX90 - DN has 4 max calls.EX90 running TC6.2UCM - 9.1SCCP phones - DN's have 200 max calls.Does anyone know if this is hardware limitation or how to increase this parameter? The ad-hoc conferencing parameter is configured for 8...
Hello all and thank you for your help in advance.Im trying to setup two sip trunks one a callmanager/gwy solution and ive been having some issues with translation profiles not working for some reason. To dial the first provider you use 9 and the seco...
Hi,I'm using CP3905.9-2-2-0 and CP8941 on CUCM 8.6. I have problem with the date/time format for CP3905 only. I installed the locale Portuguese and the CP3905 continue with english format (MM-DD-YYYY), I need that be in Portuguese format (DD-MM-YYY...
Hope I'm posting in the right forum, lately we've had an issue of people accidentally dialing 911 when making an outbound call, is there a way I can run a report or view a log that will which extension(s) these calls are being placed from? I've tried...
CUCM 8.5Has anyone found a way to move a large number of translation patterns from partition A to partition B , using a BULK edit method ?BULK tool seems to only allow edit to users, phones, lines. THe only method we found was to EXPORT all trans p...
Hi Guys,I have the following doubt: I enabled audit log in serviceability and did changes about IP Phone parameters. I collected the logs about RTMT, and I would like know if the logs about RTMT is able to show, for example, change in the display ab...
We have certain users who cannot retrieve certain voicemail messages. We are running a cluster of unity connection 8.5 servers. Has anyone else experience this issue? If so, how did you go about troubleshooting and resolving?Thanks,Sent from Cisco Te...
Is there an easy way to merge two different clusters into one? One cluster running version 8.6 and the other is running version 7.1, the new cluster will be running version 9.1 and will be on s different ip scheme than the two old clusters. The exp...
I have been looking for a way to change the system default setting for all the DNs on all phones, from an audible alert to flash only. Users are complaining that they hear on audible beep when a call comes in for a DN while they are on a call with an...
here is my delima,I have two CME's in two separate locations with IP Connectivity between the two.CME-A has my PSTN Connection and phones physicaly connected to as well as registered to it can dial out and to each other.CME-B has a handful of phones ...
Dears;can you tell me how to make incoming external number not appearing in IPT,I have CUCM 8.6.2 and FXO four ports card installed in Cisco router 2800, and I am connect four phone line to FXO, calling process, incoming, and outgoing calls work fine...
I have a cisco 2811 with an AIM/CUE. The license installed is for CCM. So.... i cant configure it to find the onboard CME.. If i were to come up with a Cisco CCM can i point the CCM to the CUE vise versa?I then assume i will need to come up with so...
CUCM 8.6. How is the phone making calls out when there are no css on the device or DN. I can identify the CSS/Partition used in the CDR for the calls but don't know where the phone is getting it from?deviceCalling Search Space <none>AAR Calling S...
Dear Experts, My question may not be very rocket science kind....actually after having some connectivity problem b/w phone and switch i tried one thing by cutting the wire connecting switch and fone and i found that only four ...
