Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I got a problem.I have two CUCM clusters : one in v9.1 and the other one in v8.6I made i SIP trunk between the two clusters in order to be able to make call from one to the other and it works.Now i've just configured a hardware conference bridge i...
I have a problem with a 7960 phone whereby an additional line configured on the device does not light up when it is in use.other lines on this device do light up when in use and i can't see anything different amongst the settings of the lines that do...
I am installing a new cluster (the first on I am doing without professional services) and have 2 questions regarding DNS configuration.1. Do I need to configure DNS during the installation process? Do I need to have DNS running at all?2. If ...
hi, i have CME and fxo ports, one line comming from service provider.if call from outside it rings one phone (ext 2000) at reception, i want if one call from out side to ring two extension at same time (2000, 2002)my config.voice-port 0/0/0connection...
When I call to another extension, they can hear me, but I can not hear them What is problem?
Hello all,We have several 7911 IP phones that load term06 or term11 and load files with version 8-3-2-27 that I think is version SCCP 8.8.3, right?I've forced on UCM to load version SCCP8.3.3S but it doesn't upgrade.The only thing I've seen is on the...
Hi,i changed the security mode in CUCM 8.5 to "mixed mode" using 2xUSB Token and CTL Client.i can't update LSC certificate into Cisco 8941 and 9971 ip phones.Any ideas about this issue?Regards
Hi,I used Cisco CTL Client and USB token to inplement security in CUCM 8.5, i have a question, is video calls encryption supported on CUCM 8.5 ? Regards,Mahmoud TAZI
this is a problem related to mva i hav a h323 gateway configured with an mva application with incoming dial-peers when i dial the mva number from pstn it asks for the pin number when i try to forward the call to a numberthe call gets disconnected in...
Hi,I have to upgrade a 4.2.3 cluster to 9.1 while migrating on UCS.I planned to do a fresh install of version 9.1 and then proceed with export/import of data.MIG-CUCM-USR-A and MIG-CUCM-ENHP-A have been sold. So I haven't got any PAK licence file.As ...
Hi ,I am having a SRST configuration for both SCCP and SIP phones (9971 IP Phone) . SRST version is 8.5 with 9971 phone firmwares (same version as CUCM) that is ‘sip9971.9-0-4.loads’ with the additional .sebn files loaded in the flash. SRST fall...
HiWe are facing a problem with CUCM 8.0(3) and 8.6(2a) when a remote destination calls in from an H.323 gateway to a busy IP phone. The mobile phone with the remote destination number just gets a ringback tone (Q.931 Alerting) as if the IP phone woul...
First off, let me say that this question also involves Cisco ASA's and Site-to-Site VPN, so if I'm posting in the wrong area, please let me know.We are currently in the testing phase, (as this is a new topology configuration away from our current net...
Hi,I have calls coming into my cluster in E164 format, whilst retaining 7 digit internal extension numbers. I have two clusters setup using a non-Gatekeeper controlled inter cluster trunk, the issue I have is the + not being sent across the ICT, for ...
Hi Guys,Need help..I have one Gateway router running mgcp with CUCM 9.x, i have one FXO card(Vic2-4FXO) card installed in Gateway router (Cisco 2911).I want to register Fax on the CUCM 9.1.I never done this before, please help me in this regards.Than...
