Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear Team,I need cisco ip phone 9971 Arbic user guide.Please send me the link to download.
I want to change the password of CUCM also linked to UCCX.If you change the password in CUCM will not work on UCCX, is there a procedure to do this?Both are of version 7.
Hi AllI have Cisco unity 8 which gives the below error:Server.CreateObject(AvSaLocalization.AvSaLocalization.1) failed.This is most likely an error with a DLL, probably AvSaLocalizationSvr.dll or perhaps AvSaLocaleInfoSvr.dll.Check that these files a...
My customer's DID number is used to be connect to Fax Machine, current they change this number connect to normal phone extension.They want to keep using this number as ext for phone, however they continue to get fax call. My question is anyway to blo...
Hi voice team, i have an microsoft lync extension 6841, and i try to call an cisco extension 7611 that belong another city (call manager express).I calling from 6841 to 7611, i hear the ringing, but when the user answers, the connection drops.The sam...
All,In our environment we run CUBE enterprise via SIP trunks to our carrier. I'm getting users complaining sometimes they have to enter digits more than once in order to join the conference. It's a hit and mis kind of thing. On our SIP profile that's...
Hello!Our customer has some kind of legacy conferencing equipment with E&M ports and we need to connect it with PBX's as shown on the attached picture. PBX1 connects to Conf1 and PBX2 connects to Conf2. The difference is that PBX1 and Conf1 are both ...
Hello, I want to go and buy a PC to support CUCM 8.6.2 running on VMWare.I know there is a Cisco page which shows which server models are supported, but can someone please tell me specifically what RAM, CPU power etc I need, if I go a buy a regular P...
Dear Team ,Please let me know ,cisco ip phone designer is end of Sale and what is the the replacement for this product.?
how to load FL-CUBEE-25 license on 2921 gateway and how to verify that it has been successfully loaded.
Hi All, we have a customer that using CUCM in IP side, and motorolla in RF side. is it possible to have incoming PSTN call and send the call to E&M port in 2921 router with LMR license? basically when someone from PSTN calls to the specific number, c...
I am facing two types of problems at two customer locations.1. First problem :After dialing MVA no from PSTN line, I get Welcome message and then after pressing 1 and entering pin it says this is not rcognized pin pls reenter.2. Se...
There is cluster with 1 PUB and 4 SUB. I have configured CDR/CMR server where CUCM suppose to send the CDR files. The files are sent but only for one of the SUB and not for remaining 4 servers.
we have a Cisco Unified Communication customer with a 2921 VSEC/K9 SRST router in Mexico with 2 connections1. connection to our MPLS Network for on net VOIP and Data communication2. connection to a 2nd carrier that provides SIP over DSL/IP to PSTN fo...
how to change the ip address of call manger through command line
