Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear AllI have CUCM 7.1.5 and SA Annoucement 7.1.5 , the problem is once i called 4000 group ID from the cisco phone , it gave me just connected and one tone but the others phones in the same group can't hear any things but all phones in this group g...
Hi ,i unable to add the backup device in CUCM. Version is 7.1.5 SU5. BAckup device name paramater is hideout.unable to type the device name.
I would like to know how I should set the ring time of Cisco IP Phone 7941 Series, in Call Manager. I want it to keep ringing until someone picks it up.Also, when a customer calls from the reception phone with the extension 1203 (not an IP phone but ...
Hello,We have CUCM Business Edition Version 8.6.2.21900-5. I have setup a SIP Trunk and configured CUBE to route calls through SIP Trunk. On verification, found Incoming calls are working fine, but Outgoing calls failed with Telco announcement "Your ...
Hi everybody,There's a customer that has a cisco 2921 router (Version 15.2(2)T //// "flash:c2900-universalk9-mz.SPA.152-2.T.bin").It has two FXO ports with phone lines: 1348 and 1074.1/0/12 -- fxo-ls up dorm idle on-hook y 1/0...
Hello,does any have something like a sample script or a link with some easy to read documentation on generating a Unity Express AA script? Something basic like "Thank you for calling. Press 1 for sales, 2 for customer service" blah blah blah.Some...
Hi there, I am configuring an ISDN fractional 10 for one of our branch office. my understanding is that for B channel, Cisco IOS default is in descending order, same as the Telstra the provider, to avoid confliction with Telco, we should pla...
What Voice Interface Card is Needed in Cisco 2911/K9 Router to make Voip Call Outside Network. Internet connection is coming in router though ADSL card interface in this router. IP Phones Phones are registered in the network to make call internally b...
Our company has a dozen phones with RingCentral and I am considering purchasing our own system as I understand it should be cost effective in the long run. We own our IP phones that we use with RingCentral and they are Cisco, so I thought it would m...
I have a simple setup where the incoming main office number is translated to ext 200. Extension 200 is the Pilot number for the Hunt Group and I also have ext 200 assigned to a DN that is assigned to the main office phone along with ext 100; that way...
Hello,Is it possible to have two different tftp servers in my network?1st tftp-server for IP Phones configuration files2nd tftp-serverfor IP Phone firmware loadsThank youDimitris
Hello,I configured CUCM to generate and export CDR but he is only exporting CMR to the FTP serverAll services of CDR are runningThere is only one server running CUCM.‘CDR Enabled Flag’ to TrueCDR Load Schedule is enabledRegardsLeonardo Santana
[I hope I got the right forum area]We use a mitel 3300 PBX for all our VoIP, across mostly procurve equipment, but Cisco too. All runs great, except at our biggest branch office, which connects via a 100mb metro-E. The telco hands this metro-E to u...
Hi all,I have a problem with my Call manager 6.1.2.After a loss of energy the server comes up but some services didnt start.Here the list.admin:utils service list pageRequesting service status, please wait...System SSH [STARTED]Cluster Manager [START...
Hi,I'm working on a worldwide design and just have a question on maximum latency between remote locations (with phones and Voice GW) and CUCM that will be placed in Data Center. Do you have figures on this point? I can't find it in SRND.Many thanks f...
