Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I have 2 CME each one is having one PRI terminated. I have 20 phones. 10 is registered to CME-1, rest 10 t the 2nd CME-2. I wan to achieve: if PRI-1 goes down, phones registered to CME-1 will get de-register & re-register with CME-2. Is this achie...
CUCM 8.0.3.21900-87942 Firmware SCCP42.9-1-1SR1SI am having random instances of Disconnect Cause Code 47 dissallowing calls from being answered. I usually look towards Codec/MTP for this type of cause, but I am getting these on Cisco IP to IP calls. ...
Hi,Please anyone suggest me how to make communication between CME and CUCM.Um working on GNS3 and i have installed CUCM 7.x on vmware workstation.Phones are successfully registering with both of dem but um unable to make communication between dem.Um ...
I am planning an upgrade for a (3) node 7835-H1 cluster running 7.1(5)SU2 to a (3) node cluster running 8.6(2)a on VMs.Since these servers only support a bridged upgrade I was wondering if I could do the following to reduce the risk and amount of dow...
Hi,I have a CUCM v.8.5.1 installed on a "MCS7825I5". The phone sets used are: "CP-8941-L-K9=" and "CP-6911-CL-K9=". My concern is this, when I try to change the language from the default (English) to French on the 8941 phones, I only get the French d...
We're running Call Manager 8 and Unity Connection 6. All of our phones default to voicemail if no one answers their phone. We have a reqeust to have a certain DN to go to the attendant and give options such as a directory of users or to contact anoth...
Hi allcan anyone tell me the typical structure of the cisco call manager phone system, and what the building blocks are, say I had a large HQ, with other large offices distrubuted around the world, what would need to be installed where? would I have ...
Hi there,I have a music on hold servrer that have an audio jack output. I have a UCS server that have CUCM on it.I know that UCS doesnt support any audio jack / usb input.Is it possible to use a 2901 gateway with an e&m card for the audio input ? Is...
Hi All,I am faced FXO disconnect problem, I add the following configuration:voice class dualtone-detect-params 1 freq-max-deviation 20 cadence-variation 50!voice class custom-cptone Disconnect dualtone disconnect frequency 425 cadence 500 500! voi...
Hello all!I`m trying to find some documentation about how to change ring tone on IP phone 6911, but I'm not able to find some thing clear about it. The only thing I found on data sheet of 6900 series phones:Multiple ring tonesThe phone offers seven u...
We have a site with 2921 running cme 8.6 and ism-cue 8.6 running on it, networking with nortel 11c(PBX) via E1. Now we meet a problem, when a call from PSTN and leave a message to any extension, the voice mail can successfully save on cue, but when t...
Is there any way to change the amount of rings it takes for a cell phone to begin to ring when setting up Cisco Mobility? Currently it takes about 2 rings before our cell phones rings with mobility enabled. I was wondering if there was any way to cha...
Hi All, I have added 2 NTP Server IP addresses as shown in Capture_NTP1, but how do I apply one of these references to the phones?.I have looked under the time and date group and tried to add the server IP addresses under "Phone NTP References for ...
We have completed migration of subscribers, call handlers and rest of entire configuration to 8.5 connection and left the messages in the old unity 4.2 system. i would like to know how to get all the greetings in a location as .wav...
Dear All,We are looking to integrate our callmanager and Unity connection with a new MS AD global catalogue server. I understand that i need to import a new certificate via the Cisco Unified OS amministration in the respective servers. I have found...
