Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi ,Madhab here, I am getting a problem in my VoIP Network. In my network more than 2000 IP phones are running with CUCM6.1.But last Two days , When I am trying to add a new phone or replacing any faulty phone, Phone is not getting register though th...
Having just had my CCNA for a year, I'm finally getting some really good hands-on experience at my current workplace with switch environments. But I also get to dwelve into Cisco VOIP, configuring phones for use on CUCM 4.3. But I know just enough to...
Hello, I'm seeking assistance in configuring a Cisco ATA 187 with my Avaya PBX to provide analog dialtone at one of my locations. I'm also trying to figure out how to get into the web server to change some settings or can you only change the setting ...
Anyone advise on the setup instructions for Cisco Mobile 8.1 for Ipad 2 connecting to a 7.x UCM.
Hi,I have this scenario:PSTN ---- E1/T1 card -- CME 2811 <--- H323 --- > CME 2851Incoming and outgoing calls work just fine in CME2811 and I just added CME2851 which I can make internal and external calls fine but when getting a call from pstn it d...
hy allSince i am a beginner to this domain My doubt might be found silly but My question is can we configure a PLAR number to a IP phone and if so how can we do it ? and if not why cant we do it ? please do clear my doubt Thanks in advance P.Vishva...
Hi,I have a setup in my voice gateway where there is FXO card with 4 ports and there is a PSTN line connected to one of the ports. As of now i am making outgoing calls from my IP phone which goes through this pstn line. I have another line which is a...
I've got 3 CIPC's installed on identically cloned Windows 7 workstations. One CIPC is able to initiate a MeetMe conference with no problems. The other 2 workstations get a fast busy as soon as they dial the MeetMe extension.All 3 phones are in the sa...
Hi, I would kindly like to know about the latest version of IPCC and the steps are required to configure it or install it ( with the hardware specifications ) as well.
Hello All,I wish to ask for clarification on the following:1. Is it ideal or not to have a publisher as the primary server in one or more CUCM Groups of the same CUCM cluster? What's the implication of doing it either way (having publisher as the pri...
Hello,I'm looking for Cisco IP Phone Services SDK 8.6(1), but I can't find it.In the developer website http://developer.cisco.com/web/ipps/docs, the last version is apparently 7.1(2).Could you help me to find it?TIA and regards.
I have one FXO line on voice gateway (h323). Outgoing and incoming calls are OK. When i make outbound calls i am able to tranfer the calls. But the problem is that when i make inbound call to an extension (connection plar extension) and transfer that...
Hi all hope you are well. I have a question about locations and the best practice when configuring them in CUCM. We have a number of sites around our network that connect at either 10 or 100mbps, there are around 90 10meg sites and 30 100meg sites....
I have a gateway running 15.1.3T2. We require SRST and have enabled 'call preserve' under 'voice service voip'. We have also set the 'Allow Peer to Preserve call' in the CM Cluster Service Parameter. Call that are put on hold for longer that 30 secon...
Hi All !!!I kindly wanted to know the exact process to follow for integrating the cisco call manager with the Blackberry devices ( all different models), can somebody kindly guide on this, as the customers i am working for are pushing for the int...
