Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have cluster of 2 CCM ver 6.1.2 ( One publisher + backup TFTP and One subscriber + primary TFTP ) And we replacing it with cluster of 3 new servers with CCM ver 7.1Also i have one Unity 5 and want to replace it with Unity Cluster ( 2 new servers...
Dear all,I have CCM system version: 4.2(3) sr4a, located in my company head office.Some IP phones located in the head office and most of IP phones are located in our another site registered on CCM through MPLS line which connects this another site an...
Hi,I want to attach h323 client(SJPhone) but problem to dial from SJPhone to IP Phone.Please advise!!symptom) when I dial from SJPhone to IP Phone, ringing once in IP Phone but disconnec immediately (the reverse case that dail from IP Phone to SJPhon...
Hi Guys we have 3 CCM servers one publisher and two subscribers. Virtual memory is running at 80% on the publisher and about 60% on the subscribers. I keep getting the below alerts.Should I be overly worried about this alerts? And if so what action s...
Hi,I am doing a CUCM Global UC implementation with H323 Gateways, 0 and 9 are mixed as PSTN access code. My question is how to implement + dialling.The plan is to use Route-patter as below, one for each country code, should be about 170, put then in ...
We have a customer with a CUCM 6 and Genesys contact centre integration. They are using NICE to record inbound calls destined to the agents. What we have found is that the audio in the beginning of each recording is clipped. The file contains approx ...
I have a number of 7921 wireless phones and all of them seem to be having echo problems for internal callsanyone got any good troubleshooting guides for this? or any knows issues with the 7921?
hihere my strange situationI try to route the call from isdn to my two internal sip serverall seem ok with normal desk phonebut when I try to malke a call from my cellphone I can't reach any internal sip!!only with the "connection plar xxxxx" comamnd...
First off, thanks in advance for helping out on this. I know it should be easy but for some reason I cant figure it out. I have set up a test CCME and everything is working just fine. I have 2 phones and they are registered and all is well. What I...
Hi,I currently running CUCM 7.0 with a 3845 gateway connected to a Siemens ISDX via a QSIG and everything works fine apart from when calls are transfered from Siemens (Swicthboard) to Cisco the "calling" CLI is not transfered when the call is connect...
Hi,A few days ago I inserted a network module NM-HD-2VE in a Cisco 3725 chassis in order to insert two VWIC2-1MFT-E1 cards.The customer have a CUCM 4.3 and when I tried to configure the endpoint of the second VWIC2 card, CUCM showed a window in which...
Hi expertz,It's been a year now that we're using the ASA's phone proxy. All working well except for the extension mobility service.i can display the word extension mobility but it gives "http error 404" when clicked.port 8080 is already opened and i'...
Hi,i must migrate from Nortel CS1000M (4.5) to CUCM 7.0. I read many docs about it and how to accomplish this using QSIG. I need to use a different method to migrate with qsig. I explain:1. Initial situation: Nortel PBX connected to PSTN by E1 (all i...
Hello,How do I enable call waiting on FXS ports on 2431 IADs? I tried several different configuration commands and they either do not apply to the chassis or do not seem to work. I am running IOS 12.4(24)T1. Are there SIP message constraints? The dev...
