Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have been using either VG224 or ATA 186 as VoiP gatewas for my analog phones with Call Manager Express. I'm wondering if anybody is aware of an available 8 ports VoiP gateway that i can use with CME. Again i need the gateway to hook up my analog ph...
We have CUCM 6.1. We want to add new users from new domain. I have added LDAP directory for this new domain and has been able to pull the new users from this new domain.I went to “User Management > End User” and found the new users from the new dom...
Hi,I have one server CUCM 5.0.4 and one Cisco 2821 configured as H.323 gateway in CUCM for connecting to PSTN using one E1. Also this Cisco 2821 have WAN connection.I want to do some tests with IP link to PSTN using an H.323 IP Provider (NOT SIP)Ca...
Can anyone of you point me to a source showing the experianced quality difference between G.722 & G.711? I'm lokking for MOS or something.I know the technical difference but can't find any verification of the by users perceptual difference are.
hello,i have an adsl line wher my internet is connected and an anlogue phone is connected as well..iam planning to connect my router FXO to the line where my anlogue phone is connected..is this right?thanks
Can any one point me to same documents regarding the restrictions on callpickup group notifications for callmanager version 6.1.3, i'm having several issues to get the visual notification with called/calling with 7911/7906/7960 phones.Thanks
HiI have a requirement to have an analogue device that auto-answers. In CUCM 4 you could activate auto-answer on the ATA DN within CUCM, and now with CUCM 7 I see this has gone.How could I get an analogue device to auto-answer using an ATA or FXO car...
I have a client with a CUCM 4.2 using two separate 2811 as MGCP gateways, each with a PRI T1 for inbound/outbound calls.We're having a problem with seemingly random inbound calls that will have one way audio. The receptionist will answer an inbound ...
Hi all,I am currently running CCM 4.1.3 on a 4-server cluster (1 Pub and 3 Subs) and am planning on migrating to UCM 7.1.3. I am looking for best advices/suggestions, please share your experience if you have gone through this path before.One of my co...
Hi All As part of a large migration from TDM to IPT we have installed 3 x V224 Analogue Gateways for use with Modems on Laptops etc. to dial up to customer equipment via the PSTN (TDM). The engineers who are initiating the modem connections a...
Working on a CM 7.1(3) with local user database and extension mobility. User device profiles are associated with each user ID. The corporate directory on the phones show the primary number of the UDP, but the directory on the ccmuser web page autom...
I have a 7960 in my office with the ethernet line plugged into my computer, and it works fine, but......I tried plugging a 5-port Linksys unmanaged switch to the output, and it does not work. I took the 5-port unmanaged switch home, and it works fin...
Hi, I have a group of users who all share the same administrative assistant. All of their phones (7905's) are configured to forward-no-answer and foward-busy to the admins extension. None of these folks have voice mail, except for the admin.The pro...
Hy,It's possible to configure IPMA intercom auto answer off on CUCM 7.0
I made a logo to 7911 phones but I would like to charge it when the phone stars and no when the user choose it in preferences oh the phone.How can I do it. Thanks.
