Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am have 2X E1 VWICS one going to the PSTN and the other connecting to a Nortel PBX. Each E1 is in a serperate wic slot so different types of clocking functionality can be applied.I have to ensure that E1 connecting to PSTN passes the clocking to 2n...
Hi there ! Condiser that I have a CUCM+IPCC in the main office and a SRST router in a branch.1) What would be the best place for each of this products, considering that I might have a link down: CUCM, Unity, IPCC and Presence.Should I install any pro...
Hi,Need help in configuring cisco call manager 4.1(3)a) How to insert SDP parameters(codecs, IP address, ports, etc.) while initiating a call. (e.g., Invite, Ack, etc.)b) How to reply with the supported SDP parameters while answering a call.(e.g., 18...
Can IP phone load file be upgraded without connecting it to CCM & using laptop as tftp? If yes what is the procedure?Thanks,Abhas Jain
HiCan anyone recommend a 3rd party reporting utility that reports on missed calls etc within UCM 7ThanksRod
Dear All, can we make the agent be able to choose more than one code after the call (two or three)not only one while being in the auto work mode?
Hi, we have CUCM 6 and other Cisco MGCP and H323 GWs. Music on hold and call transfer has been working fine, but since Friday they has stopped working for external callers. I have made two calls coming in from two different MGCP GW and I don't hear a...
Here's the scenario. User A, who has extension 1000 on his Cisco IP Phone, has Mobile Connect configured. It works great. If User B calls User A directly User A gets the Caller ID of User B both on his phone and his cell phone.Let's say User B cal...
We have dozens of handset cords that are being curly up. Where would be the best place to order the handset cord? That match the color of the Cisco phones?Anyone have bought the handset cords before?Thanks,
I tried to add more than one group to users using Bulk. while I was creating User Template, I found that there is no option to assign more than one group to user. I referred to Bulk Administration guide 7, I could no find the option to do this.I need...
Hi,Customer procured Cisco phones (7960's left by previous occupant) can we reuse them in a ground floor Unified CM deployment?Thanks
How I can test H323 telephony for 2 sites without using CUCM?
Hello everyone,On CCME 7.1 if I have a 7941G with 2 DNs on it should I be able to do a Call Forward all on both lines? The systems takes the command from the phone for both lines but te second line keeps ringing at the phone.Thanks in advance. All ...
Im looking at deploying around 6k phones. I have about 15 sites. In the past, I have set up the following,4 digit DNs at the lineVM profile to mask to 7 digits (site code+dn)And then Translation patterns to/from each site. (7 digit, to another CSS...
Hello,I have been tasked with configuring an E.164 dialplan for a multisite deployment of CUCM 7.xI have always used the "traditional" way of doing a dialplan and have looked throughout Cisco's documentation for configuration examples. It seems that...
