Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We got an odd problem. When we dial a couple of external number which starts with 686 prefix, the calls are routed back to our internal numbers. The following is the output of "Debug isdn q931" on our Cisco Voice Gateway.Jan 7 09:17:37.253 PST: ISDN...
Looking for some ideas. What is the most efficient way to add 300 phones to my CM cluster? Is the BAT tool the fastest way to do it? Has anyone used TAPS? One concern is, we usually deploy ext mobility which isn't dependant on the phone. This particu...
I`ve just downloaded the two IOS files I require for an upgrade and have combined them using the COPY UCSInstall.....PART1OF2+ UCS....PART2OF2 UCSInstall....SGN.ISO as per Cisco but the resultant file is very much smaller - is this correct,Am I missi...
Hello,I'm having a doubt for a future implementation. Will i have any problem working with a PSTN Sip trunk connection to the telco to receive and send faxes in a Cisco Fax Server solution, instead of having T1/E1 directly connected to H323/MGCP gate...
I have been tasked to integrate overhead paging into the new fire alarm system which has a paging ability built in. Is this possible to do? We currently have an old overhead paging system installed which is tied into the IP phone system via vg248 gat...
Hi,I have a Cisco 1861 router with the following code:c1861-advipservicesk9-mz.124-22.T.bin&Version 7.0(1)Cisco Unified Communications Manager ExpressI can make out bound calls to the PSTN OK from the 7970 handset and the analogue phone attached via ...
Hi all,I manage a network whereby the branches are connected with VOIP using pots connected to local PABX. All has been well till yesterday when one branch cannot hear callers from the central site. I have tried checking all that i know of VOIP but ...
Hi all,i have CUCM 6.0 cluster and we should use a recording software that works with analog port.We connect CUCM with recording software through some ATA and seems to be work correctly: the recording start when the user invoke the call canference wi...
I have two dial-peers configured that are similar except length of number.dial-peer voice 5500 voipdestination pattern 55..dial-peer voice 555 potsdestination pattern 555....As soon as the number matches a dial peer, it ignores the remaining digits d...
hiAm having problems with upgrading 7912G-A phones firmware. I have configured everything as follows:copied the firmware to tftppathcreated a gkdefault.cfg file using the cfgfmt tool.The phones don't pick the new firmware. I have to either delete the...
Dear all,I have tried to upgrade a CCM publisher from Version: 6.0.1.2000-3 to Version 6.1(2) in an VMWare environment before doing it in a production environment without any success.I have followed the upgrade instructions and use a remote location ...
A new year, a new question.Well, this feature might be by design but I'm curious nevertheless.We're running Cisco Call Manager 4.3 and use the 7961 phones.Now some users report that their voicebox had received a call although they have had activated ...
Hi,our phone systems consists of a voice gateway, a publisher, a subscriber, a mobility manager, an UMS-server and two VG224 gateways. The publisher runs Cisco Call Manager 4.3.Phone calls are forwarded directly into the exchange (line).Recently we'r...
Hello, I have a Call Manager 4.1 with a mgcp gateway. At the moment we have all users using a CLID of the main number. I wanted to have the majority of users sending their DDI number as the CLID and the remaining users sending the main number as thei...
Please can someone tell me wich models of cell phones are Compatible with cisco call manager? i know that some models of Nokia Eseries are, but wich ones? and what about blackberry? and other models? Can i find some information about this on Cisco we...
