Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have a CM6.1 system. Is Feature Access Codes supported for CM6.1 other than for Mobility?I use Live Record and currently I have to Press "conf" + Live record route point + "conf" - this is a 3 button option. I am trying to make this a 1 button func...
Hi, all I have a problem with all phone in my Cisco UC500.Sometimes all phone do a reset process abnormaly, in the log I see:May 14 12:21:24 192.168.10.1 3387: -Traceback= 0x80024204 0x802D6934 0x802D6AB8 0x802D8F30 0x802BB518 0x802CD6D8 0x802BC01C 0...
Hi i have next sheme CCM6.1 -> 2821 with vic2/4fxo and em-hda-6fxo-> PBX -> pstn.All incoming call goto over vic2/4fxo on ip phone. Then secretary transfer call on pbx over em-hda-6 fxo and subscriber end call to hang up the receiver. Port on vic2/4f...
So,I am setting up phone book's on several 7921G's, and am trying to do so via the webpages. When I try to access the phone book, I get "Access to Phone Book via Webpage is not enabled". I have set the web administration to Full under CCM for the d...
Hi all,CCM 4.13I dont think this can be done, but I want to verify with you guys.1. extension 1111 calls extension 1112, if extension 1111 place on hold, we dont want any music being played.2. PSTN calls DID extension 1111, when extension 1111 place ...
Am I missing something or is it true that you can only configure a CE520 switch with the Cisco Configuration Assistant?? After I set it up with the Express Setup, I clicked on configure and only got an advertisment to download CCA??Thanks,Tony
I don't know much about the interacy's of analog/paging, so need some guidance. A customer has an existing PBX system with paging setup. They have to self-amplified speakers that connect to an external valcom power supply. They are putting in a ne...
Unified SRST which is embeddedwithin Cisco IOS Software to help provide high-availability IP telephony. This feature is usefull to provide backup to IP Phone during faliour of call manager. I would like to know how long SRST can provide backup to IP ...
Hi all! somebody knows like recovery security password in a CCM 5?Thanks!
helloThere is one cisco express 500 24 ports PoE with 24 7911g and there r many concurrent reset on the connections. Does anybody have any idea what can be wrong?thanks
Hi,Could somebody please advise as how to change the busy-out tone timer value in the Callmanager 6.x from default 3 minutes to 20 seconds?Raj
Hi,I have a very peculiar problem at one of our customer sites. There is a DN 6001 configured on CM5. It is connected to a fax machine through an ATA. When it is tested externally from a PSTN line, there is no problem. However, if we try to call the ...
II was curious is there was a utility with the likeness of the dblhelper from version 4.x? I thought that was a quick and dirty way to see the health of your DB. I know that version 5.X does not use SQL...If not, what is the best way to determine t...
Is it possible to register two CUCM to one gatekeeper and properly route calls between them. CUCM 4.3 ---> GATEKEEPER <----- CUCM 6.0CONFIG: gatekeeper zone local Cisco2811_GK1 cisco.com 172.24.1.250 zone local Cisco2811_GK2 cisco.com zone prefix Cis...
Gurus,I was planning on deploying some 7912's in several 'common' or public areas, that just needed a basic phone. However, I used a 7912 today, and besides that it won't interface with a locking wall-mount kit, also it seems that it does not support...
