IP Telephony and Phones

I am trying to install the Exchange 2003 System Management Tools on a server MCS-7825-H2-ECS1 server that is running Windows 2003. I used the Unity Platform Configuration Discs that came with the server to load the OS. When I get to the part to ins...

I am testing IP communicator v2.0 with call manager v4.0(2a)sr2c. Most of the ipt communicator functions and voice quality are working well in the office LAN. Except, there is no MOH when remote calling party puts (ipt phone model 7940)the call to...

Hi,i have ccm4.1.3 with cisco 7900 series ip phones. Have a small query, if I can have some sort of messages/ screensaver shown in the display of these ip phones. The message can be a blinking one or screensaver type on the background.Need help in ge...

Hi,I'm trying to configure CME(4.0).When user dials to PSTN, IPPhone displays manipulated number instead of the actual number dialed.I want to display original dialed number on IPPhone and I have to configure CME to select PSTN line.If you have any s...

Is there a reason why Cisco don't have the Canadian French locale?I know the user locale only affect the phone display and some system prompts. Some one told me the France French and Canadian French are very different and there are some historical/po...

hi i have a 2811 cisco router with fxo card and 12.4 advance enterprise IOS i have no voice-port commandi have just voice-card !!help me

How h323 will be handle 2xPRI with DID attached to different routers in case all 24 channels are taken?Basically, if the voice gateways are setup has H.323, and we place PRIs on each router. How can I configure CCM for outbound calls to *both* ro...

I understand that when deploying a CCM cluster the Publisher must built first.Does it also have to be attached to the network before commencing with Subsciber build?. Cannnot seem to find the document at the momment expaining the prerequisites and pr...

Hi, I'm having a bit of trouble here with the port speed on a few phones. It doesn't seem to matter which type of phone I use, 7911 or 7941. I have any area, All on the same VLAN, All points going to the same switch. When I connect a phone through...

HiCM4.2.3sr1 with UM4.2.1pstn calls 1000 which does a CFAll to 2000 which does a CFBusy/CFNoAnswer to VM but it always reaches 1000 VM. I want it to reach 2000 VM.Unity's CallViewer always show 1000 as the forwarding DN.I've tried:1. Putting TP to ch...

Hello to everyone! This is my firs post!I have this problem under a Cisco CallManager 5.1.2.1000-11 with Attendant Console 5.1(1):When I want to transfer a call, sometimes the previous number entered appears in the "Enter Number" field.The problem is...

I have a test plateforme with to PSTN provider and with only one 2821 voice gateway.I'd like to simulate the PSTN by linking the 2 E1 controller on the VWIC-2MFT-T1/E1 of my gateway using to E1 cross-cable.At the beginnig I did in MGCP but it didn't ...

Hi all, I cant for the life of me get my fax solution to work I brought a VIC2-2FSX and want to have two fax machines off of it. Does anyone have a config already configured I can look at. I seem to get one thing sorted then another thing breaks. Exs...