Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello experts,I had ciso 2821 (CCME bundle) with E1 connected to Panasonic TDA-200. Every calls is going correctly, but I had a problem with associating incoming call with dial-peers, to filter calls by COR. Question:In witch sequence dial-peer param...
Dears i want to upgrade 7970 firmware from SCCP to SIP through tftp program not Call manager. Any one know how to do this ? Thanks,
I have a three CCM cluster over WAN running 3.3.3 SR4a. It has been operational for almost four years. In the past two weeks there have been at least two instances where VoIP users could call out of the VoIP environment, receive calls from outside, b...
Hi, I would like to know if there is anyone that has a cluster (pub in one location, sub in another location) replicating over WAN using a single point-to-point connection (1.5Mps) Thanks.
Does anyone if this bug is going to be fixed? On the current 1.3(2) version and get this now and then and need to reboot. The bug id saids to reboot and it is listed as fixed in bug toolkit but no version or patch is available with a fix. I have been...
I have setup a CUCME with CUE module with VOIP only dial-peers, there is no direct POTS connectivity.When a call comes in via H.323 to the router, a SIP dial-peer connects it to the auto attendant on the CUE. This bit all works fine, when you choose ...
Hi, I would like to know if there is anyone that has a cluster (pub in one location, sub in another location) replicating over WAN using a single point-to-point connection (1.5Mps) Thanks.
My problem is this. The 7960 ip phones that we have do not show the light status or indicate that there is a msg waiting for them. But when they pick up the phone and they dial in their voice mail box, it tells them that there is a new voice mail wai...
All,Does anyone knows why CAR Scheduler service is not listed under CCM Serviceability -Control Center and the only option to restart the service is under W2K Services and what impact might have on CCM (CDR) by restarting it from here? Link bellow d...
Hi All; My NM-CUE has been crash last after a upgrade. when i am trying to access it is stuckCME#service-module service-Engine 1/0 sessionTrying 192.168.210.1, 2066 ... OpenME#service-module service-Engine 1/0 statusService Module is Cisco Service-En...
Hello, I'm building CME 4.1 on a 2851 to support 50 or so people at a remote office. I used QCT to set everything up, using mostly default values. I've got the system up and running for the most part, but I'm not sure if the switch trunks are confi...
I,Can any one tell me if its possible to pickup a call for a shared-lineThanks
What do you guys think is the best way to control access from the data vlans to the voice vlans? I was thinking access-list on the voice vlan interface with the ability for internet and admin functions to the servers such as HTTPS, RDP and SSH. Opi...
The phone will not ring at its destination. It goes straight to voicemail. The end user has recycled the phone and I have reset it on the CallManager side. Any suggestions?
Hello, I have CCM 5.0 with CUM version 5 as well. I have configured a SIP trunk between the call Manager and the unity. Everything is working well but when unity dials a user to his home phone number for message notification the DTMF does not work. ...
