Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I understand that when deploying a CCM cluster the Publisher must built first.Does it also have to be attached to the network before commencing with Subsciber build?. Cannnot seem to find the document at the momment expaining the prerequisites and pr...
I am configuring an H323 PRI gateway in CCM, which connects to a third party's PBX. I would like to designate the CCM gateway as the "Network" side of the PRI, and the other vendors PBX as "User".How can I specify the Network function on the CCM sid...
Hi, I'm having a bit of trouble here with the port speed on a few phones. It doesn't seem to matter which type of phone I use, 7911 or 7941. I have any area, All on the same VLAN, All points going to the same switch. When I connect a phone through...
HiCM4.2.3sr1 with UM4.2.1pstn calls 1000 which does a CFAll to 2000 which does a CFBusy/CFNoAnswer to VM but it always reaches 1000 VM. I want it to reach 2000 VM.Unity's CallViewer always show 1000 as the forwarding DN.I've tried:1. Putting TP to ch...
We recently upgraded our primary voice gateway from an MGCP 2821 running 12.4(7e) to an H.323 3845 running 12.4(11)T2. The same port on the switch, same cables, and same PRI lines were used. Immediately afterwards, we began experiencing high jitter...
Hello to everyone! This is my firs post!I have this problem under a Cisco CallManager 5.1.2.1000-11 with Attendant Console 5.1(1):When I want to transfer a call, sometimes the previous number entered appears in the "Enter Number" field.The problem is...
I have a test plateforme with to PSTN provider and with only one 2821 voice gateway.I'd like to simulate the PSTN by linking the 2 E1 controller on the VWIC-2MFT-T1/E1 of my gateway using to E1 cross-cable.At the beginnig I did in MGCP but it didn't ...
Hi all, I cant for the life of me get my fax solution to work I brought a VIC2-2FSX and want to have two fax machines off of it. Does anyone have a config already configured I can look at. I seem to get one thing sorted then another thing breaks. Exs...
Hi, Suddenly around some 20 ip phone display showing temp fail message while on call for a minute.Then i checked the logs and event logs,found that there is no gateway rehoming and reset.But in the event log one error showing that Sdl link out serv...
Hi all,Can someone explain what is the best method to backup a publisher server ? Currently I use a spare server that I restore monthly and this server is not connected to the production network, so when publisher server fails, I move the LAN cable t...
I had connected a Router Cisco 2801 (IOS 12.4.11t Sp Services K9) to Sonus GSX 9000 trough a VWIC 1MFT-E1. Configuration Router:!isdn switch-type primary-net5!controller E1 0/2/1 framing NO-CRC4 clock source internal pri-group timeslots 1-4,16 !inte...
Hi!I can't use this plugin with Windows Vista. It does not work. Is there any new version of TabSyncInstall.exe that is compatible with Vista?Thanks
Is there a way to configure user access codes for making Long Distance calls on a Call Manager Express version 4.1, or 3845 based voice gateway?
Hi,i have two cases:1) When i am trying FAC with a FAX it does work it just gives a fast busy2) When calling a number than a fax is on an extension it does not work, only when i call a direct fax it works.i have CCM413 and H323 gateway.VG224 is used ...
can I use a VWIC2-1MFT-T1/E1 to connect to a Telco PRI? My 3845 is showing a Service-Engine1/0 but not T1 controller.
