Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
After recently completing an installation of a CME in South Africa connecting to 3 x TELKOM BRI lines for PSTN access, I found very little helpful information online so I'm going to submit my findings. I had several issues getting LAYER 1 up and runn...
We are using CUCM version 11.5.1.12900-21, getting & RTMT alert about "LogPartitionLowWaterMarkExceed " attached is the snap shot for the same ...how do we resolve this issue so that stopped getting & RTMT alerts... is there any cisco documents to re...
I have small lap ( router, switch , 2 phone 7960s and 7970 and UCS220 (vm)) this is my router settingRouter #show running-configBuilding configuration...Current configuration : 1500 bytes!version 12.4service timestamps debug datetime msecservice time...
Guys, would any of you off the top of your head know if 10.5 moved or got rid of the directory view for end users to see? Our receptionist use to go to the following URL https://couccm01/ccmuser/showHome.do in CUCM 9.2 and could see a list of the ...
Cisco deskphone with model no 6945 can’t call mobile no with response “The number is incorrect” Note: If we call 90714588510 the extensions just show no 907 with above response Kindly advise
Hi there I´m not really sure if I need CUBE configuration, we are going to connect via sip trunk to another site (another voice network), I already know their ip address where I set up in the sip trunk, as you might know we are going the use the TCP ...
I am trying to see if a user has unheard messages in their mailbox. I do not have their password to use the web inbox. Unity only tells me how many messages in the mailbox. Is there any place I should look or any other tools for unity I don't know ab...
I've recently started at a company in which the design is non-traditional (to my way of thinking), so am trying to understand what I'm seeing on the ISDN PRIs. We have a SIP trunk at one of our call centers, on which calls traverse an MPLS backbone. ...
Greeting SIP Experts,I am testing SIP Trunking and having some issues with outboud calls. I get a fastbusy after dialing the called number. Please find attached CUCM version 10.5ISR 4431 with IOS Version 15.4(3)S4Calling Number: 6132604849Called Num...
Hello all.We have Cisco Call Manager 11.x, CUPS 11.x and Unity 11.xWe do auto Bac with Disaster Recovery System in UC System and save this on a file share. I want to know how some of you keep such file share clean ?Are you running a scipt that automa...
Hello all.I saw that some of new Cisco devices support OPUS codec with call manager version 11.0 and it seem OPUS is a nice Codec, but there is always a drawback :-)I want to ask if some of you use OPUS codec and if it really help to get better call ...
We are currently running CUBE version 15.6(3)M3 with a multi tenant setup on a Cisco 3925. We have two tenants setup in our SIP environment and the question was recently asked "how many additional tenants we could add to our environment?"After some t...
Hi Team , Phone is automatically connect with speaker when answering call , While dialing also automatically connect with speaker . I have done some investigation about this issue it seems hardware issue , Please advise what the cause and solution . ...
I'm using CUCM 9.1.2 and am sending external calls via a CUBE through a SIP trunk to our carrier. All normals calls are sent with a + but any call forwarded calls are sent with ++. Below is an example calling number 1-111-111-1111 (from outside) ca...
Can a 7832 conference phone register using MRA?
