Activity in Technology and Support
AMER Expert Insights Series: Cisco Duo Security and IAM
Join us for a comprehensive two-day exploration of Cisco Duo Security’s advanced Identity and Access Management (IAM) capabilities. Discover how Duo goes beyond MFA to deliver identity-first security that strengthens your organization’s protection an...
Greenfield environment ISE or Clearpass?
I'm looking for an 802.1X/NAC solution and would love to hear from administrators with hands-on experience.I've got Cisco and HP Aruba switches at the access layer.I have a ton of cameras, maybe 1500, and a ton of Windows 11 workstations.Right now, w...
Failover Ethernet1/11 (Failed - No Switchover)
Hi all!I have a question about ASA cluster failover. Failover LAN interface shows the following error:CGD600167DVPN1/sec/act# sh failFailover On Failover unit SecondaryFailover LAN Interface: Failover Ethernet1/11 (Failed - No Switchover)Reconnect ti...
Temporary License for Virtual Secure Management Center
Here's the situation I'm in: My customer has a virtual FMC that manages the SFR modules in three ASA-5516s. That runs version 7.0 as we have found anything newer doesn't work.We are in the process of migrating off of the ASAs and onto three 1140s. I ...
From Legacy to Leadership: Multicloud Architecture (Cisco/Equinix)
Introduction The Portuguese version of this Article can be found at: LINK.For an offline or printed copy of this document, simply choose ⋮ Options > Printer Friendly Page. You may then Print > Print to PDF or Copy & Paste to any other document format...
Resolved! Not able to connect to the sandbox
Hi I created a catalyst center sandbox. I received the VPN credentials and I have Cisco secure connect but can't connect to the box. I have the TLS connection on and I have connected on my browser with the address provided but I am send back to a dow...
PoE Cameras Going Offline
Trying to sort out an issue we've been plagued with since their installation. Using 9200 PoE to run Honeywell eQuip series cameras. Every week, random cameras will drop offline. They can't be pinged, anything. Disconnecting the cable or shut/no shut...
Config recommendation needed for sgt-cache used with NAT
Greetings allAfter having read documentation about SGT caching, I am unable to determine the proper application of this feature. Your assistance is appreciated.Scenario: C8500L-8S4X running 17.12.4int te0/1/2, faces ISPints te0/1/0-1 in port channel ...
vBond IP Addressing in Hybrid SD-WAN Deployment with MPLS and Internet
Hi everyone,I’m working on a hybrid SD-WAN solution where all controllers are deployed on-prem, behind a firewall.I have two types of connectivity available MPLS and Internet. During the device onboarding process:Devices using MPLS will have the vBo...
HSRP over L3 Po
Dear People:) I am about to finish my education and regarding that we are preparing a little setup. This consists of 2 FW with a VIP and an internal network of 2 OSPF zones and 1 in DMZ, connected to 2 pcs of L3 switch. We have to use OSPFv2 down...
Configuring 2 x 400GE ports on A9K-8HG-FLEX-TR
The A9K-8HG-FLEX-TR is set to 8 x 100GE ports by default.What is the procedure to configure this module for 2 x 400GE interfaces?
how to influence NSO when deleting leaf nodes using netconf ned
We use nso to configure juniper junos routers via netconf ned.We have a service template to apply interface egress shaper, which is equivalent to the below junos cli command: set class-of-service interfaces xe-0/0/10 unit 2819 shaping-rate 1g The ser...
CPLD Version upgrade procedure
Hello,I would appreciate, if someone could please confirm my understanding:The CPLD version is embedded in the uploaded image*, it is not available as individually download from the Cisco Download site. However, when upgrading the switch, the CPLD ve...
NSO not using commit-confirmed to configure a juniper via netconf NED
Cisco NSO use netconf NED to manage some juniper routers."show devices device xxx capability" from NSO returns below line, indicating the router is a commit-confirmed capable router."capability urn:ietf:params:xml:ns:netconf:capability:confirmed-comm...
No SNMP queries possible from ISE V 3.3 to the device
The SNMP query for devices is not working on my Cisco ISE version 3.3 via VM single license. Cisco ISE does not send any snmp requests. What could be the reason for this? SNMP is enabled on the device setup with the correct version 2c and the correct...
| User | Helpful Count |
|---|---|
| 187 | |
| 125 | |
| 95 | |
| 88 | |
| 79 |
