Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, here is the problem i have with ISE posture: - The posture agent on the endpoint completes checks and reports the endpoint as “compliant” - ISE sends a CoA to force reauthentication - The client reauthenticates but still ends up in the “unkno...
Hi all,I'd like to get a CUIC report on a pegging element in my UCCX script that branches off the calls, so I can get a report on how many calls went to that route, say an outbound external number or voicemail.In UCCE, I recall a calltype being used ...
Hi,My single SG350X-48P will be replaced by a SG550X-48MP stacked with a SG550XG-8F8T.Is it possible to backup the configuration of the 350 and import it into the 550x-48MP after building up the hybrid-stack?What is the recommended way/steps to trans...
Colleagues, good afternoon, I'm trying to sign a certificate using let's encrypt. But the root record A leads to the official website of the company, which is located at the hostel. As a result, the system cannot sign a certificate indicating DNS:com...
Hello, we are thinking we may be running up to this bug here on our core C1300 switches https://bst.cisco.com/quickview/bug/CSCwp39029The topology is that we have 2 Catalyst 1300's with an LACP between them, with multiple other Catalyst 9300 and 2960...
Seems pretty simple but I've been stuck on this for a bit. I'm looking to disable the group selection within secure client/any connect. Simple enough on the ASA but from what I can tell they forgot to include that tick box in FDM(Firewall Device Mana...
We have AIR-CTVM-K9 controllers and buying new APs 9120s. We are on one of the latest version of code 8.10.185.0With the new APs going in I want to use their full capabilities. ie wifi6/6e but cant find configuration for this. Maybe I just need to lo...
Hello, I read many docs about the Macro and micro cells features on AP's 2800/3800, I understood the difference between both, but I am wondering how to implement them ?
I have a PXE server ( Windows ) in VLAN 70 and PXE Client ( a Laptop) in VLAN 30. But the PXE boot is failing.. Both these are ( PXE Server and PXE Client) is connected to L3 Switch which is C9300 CatalystVLAN 70 subnet : 10.10.4.248/29IP to PXE Serv...
Network scenario: ISP>CISCO Router> CISCO FTD > Core SW >Access SW > Serverwe have two public ip like 203.76.64.16/28 and like 203.76.64.64/26 here only 203.76.64.19 is my end and also 203.76.64.64/26 is used for only one to one NAT in FTD for my few...
Hey There,I get there is duplication of data but I can't figure the math on this one and what is happening. Please help.I am trying to copy a Port-Channel of 4*1 gbps interfaces to a single 10gbps interfacemonitor session 1 source interface Po100mon...
My main question is it possible to create an RSPan where source ports are location on sw1 and sw2 with the destination port to a remote collector also resides on sw 2. And two what would the commands be?what i was thinking was this:SW1 :vlan 999 remo...
Hi Team,We are experiencing an intermittent IPsec tunnel hang between a Cisco 8000V router hosted on AWS and a Palo Alto firewall.Multiple IPsec tunnels are configured on the same Cisco router and are stable; however, only one tunnel to the Palo Alto...
