TelePresence and Video Infrastructure

I have a setup with TMS, TMSXE, Codian MCU and Profile65 endpoints.The TMS configuration is set to include a MCU for a conference reservation of at least 2 endpoints ("External MCU Usage in Routing "="Always").All the local endpoints are known in TMS...

Hi folks,Wierd query.I am working with a user using TMS 13.1.2 and a mixture of endpoints(MXP - C Class - Ex 90) and VCS's MSEsThey have started to experience a lot of systems losing HTTP connection to TMS.  They drop out for a few minutes only and t...

Hi, i have noticed that in TC4.1+, TE4.0+ i am unable to list the phonebooks on the device trough ssh. Here is what i get:<ssh admin@device-ip>xcommand Phonebook Search  PhonebookType: Local*r Result (status=Error):    Reason: User not authorized    ...

Hello all!I am trying to pair touch panel with C20 codec (TCNC4.2.0.260857). On first boot, panel sucessfully downloaded sowtware from codec and rebooted.Next, after selecting codec from list (or manually), there is user and password request.I have b...

Hi,We have some issues with InTouch remote control of a EX90. It seems that the touch is decalibrated ( no feedback on button touch  / ex :  press selfview - right up - and get feedback from Available - left up ). We perform a factory default of the ...

Dear All,Have installed all diligently and properly. The software with latest firmware (CDP) discovers the usb cams and IP phones (7965/7975) but the video does not start automatically (nor manually) when the phone connects in to a voice conversation...

Hi all ,In the branch we have VoIP Server ( open source ) connected to our Cisco Router 7200 , I build class map based on ACL contains the IP range of our SIP phones with codec G711then I put it inside policy map and give it priority 25% , the total ...

Hello,I could not find in the available documentation what is the maximum cable length between the ISDN PRI port of a MSE 8321 (or GWY3201).I see it should be a STP cable.I also see in the advanced ISDN settings Line lenght = short/long but in the he...

I have talked with Vaddio about the possibility of Cisco sending a code to the Vaddio Camera to frost the glass when it goes to "privacy" mode. They say the only way to do that is send the Power off command.Is there a way Cisco can be made to send "P...

Hi all!I am trying out to configure the VCS Starter Pack Express Version:          X7.0.1I've followed the Cisco_VCS_Expressway_Starter_Pack_Deployment_Guide_X5-1 guide.All of the steps are done. All necessary DNS configurations are done as well. Clu...

I'd like to use a multicast audio stream option instead of sound card option.I found following document on cisco website which tricked audio stream by manipulating TTL.But I could not find a way to make TTL to 1 for multicast stream from CallManager....

Question on the event logs being kept in the C-Series,  in MXP codecs when someone does a hard reboot or the unit reboots itself the logs are lost as compared to when it is a soft reboot.  I see the C-Series logs have current and historical.  at what...