Hi all, Current CUCM version 11.5.1.11900-26 ( SU1) , we are planning to upgrade to 11.5(1)SU9 if possible to SU10. Let us know whether we can go ahead direct upgrade to SU9 or need to go with intermediate version and then to SU10.
I have some deployments of 11.5.x, we are wanting to add more licenses but are confused on how to go about getting the the PAK. All of the part numbers we used in the past are no longer available for sale. can someone shed some light on how I would g...
CUCM: 12.0CUBE: 15.5(3)S4b Internal Jabber to Jabber calling works fine, can place a call on hold and MoH plays and continues to play until the call is retrieved. When placing an external call on hold, MoH is heard by the external caller for around 1...
An employee asked me that they aren't able to make a call to a couple of students. They were knew and thought she just did not type the correct format when making external calls. I asked for the phone numbers and tried calling them from my office pho...
when I try to access Cisco Unified Communications Managerthe system has not synchronized with Enterprise License Manager you will no longer be able to provision users and devices.when i to access to link Cisco Enterprise License Manager the screen i...
Hi, I've seen similar questions asked here but thought I would start a new discussion as I haven't seen an answer. We have CUC in High Availability cluster and occasionally backups on the Publisher fail. Manual backups always work but approximately 5...
Hi, I am testing the following setup: CUCM -- SIP trunk -- ISR 4331 -- PRI Like I said this is a test environment so the PRI are not yet plugged in the NIM E1 cards. So the inbound/outbound dial-peers tied to the PSTN are down by now. So Im testing...
Hi, Our CUCM is reporting the system license is out of compliance, when checking the license report it shows the Essential licenses is the cause. All the unassigned devices are analog phones that are placed in hotel rooms so they aren't assigned to a...
Hi,
Just wondering if anyone has configured Cisco CM integration with Office 365 successfully? If so, please do share steps by step document?
Thanks in advance.
Regards
Adnan
IM&P v 11.5(1) SU9 Our IM&P HA config has the Publisher at site A and the Sub at site B. We run active/passive, so all users are running from site A and only run from site B if there is a failure at site A or we force a manual failover. We had a sch...
Hi, I have the following setupCUCM PUB + SUB System version: 11.5.1.15900-18 Everytime a backup is attempted (no matter if its scheduled or manual), when all components are backed up and each one of them show "100% SUCCESS", the process get stuck in ...
Hello,We're in a process of transition and moving all staff to a new number range and new PBX. This requires being able to dial the new numbers directly from the PSTN via our existing CUBES, and redirecting calls placed to our old numbers to those ne...
Hello Guys, We have are planning to upgrade IOS version of ISR 4000 series Voice router to 17.3.4a version which requires Smart Licensing. We have Cisco Smart Software Manger On-Prem 8.X deployed in your network and Customer is enabled for Cisco Sma...
Hi, I want to know if you have two cloud registered video endpoints on the same campus, when they make the call does the media stay on net or does it go out then back ( trombone affect) ? We are trying to understand how the media is handled in this t...
Our SIP ITSP is moving to a new platform and the SIP format they are asking for is different to their current platform. It looks like I need to so some modifications to the SIP information using profiles. I understand the principle but I'm no good w...
