Unified Communications Infrastructure

Hi all,i wanna know is there any possibility for CUPC client to auto start every time the PC been logged in/ boot up?i know we can change at the profile preferences, but it only for personal option. If i got 2000 clients, its impossible to change the...

Hi,I experience a problem with the Media server (video)I've setup an MP7 and changed the password.then after the MP reload, and i try to access the system from telnet then it says that my login is incorect.how to reset it from the factory default?Bes...

Hi All,I'm trying to transfer an existing image of Phone Designer Phone to a 7945G.However after a few moments later the message is: ''A communications failure occurred''Below is the Log Problem Report:2010-01-07 16:11:01,828 [1] INFO  - UpdateImageV...

The Unity Connection team is currently accepting applications for the Cisco Unity Connection® 8.0 Early Field Trial (EFT). The primary features in this release are: Voicemail to Text-Users can have incoming voicemail messages automatically transcri...

I know that it is possible to allow customers to migrate to Unified CMBE 5000 from either stand-alone Unified Communications Manager or Communications Manager Express systems and I have the corresponding upgrade part numbers from the Ordering Guide. ...

Hi;According to the upgrade tool at http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b31514.shtml, we cannot upgrade to 8.5 in one step. The version 8.5 is not listd at all. What is the upgrade path from CUCM 7.1.5.100...

We are doing a customer upgrade and rehost from CUCM v6 to CUCM v8 on UCS.  As part of the upgrade, we need to add two additional CUCM subscriber servers into the mix.We are attemtping to figure out HOW we need to do this.  I've been told that we nee...

Hi,Running Cisco Mobile 8.1 on an iPod Touch running Apple iOS 4.2.1.Once the application goes into "background" after about two, maybe three minutes, it becomes unregistered with CUCM.(This behavior is the same while running the app on an iPhone 4.)...

I have connected my Iphone with IPsec VPN and i have try to connnect Cisco Unified Mobile Comunicator but I am getting this error.Cisco Mobile was unable to login to Mobilty Server. Invalid Certificate(1204)Can someone please let me know why i am get...

Hi all,Can I configure Unity Connection to work like Unity, in case some body reached the voicemail, Unity connection will play extension XXXX is not available, rather than the name?

We are getting ready to deploy CER in a very large organization and they would like to be able to report down to the cubicle level.  This is going to require several ERLs the way I see it and from what I'm reading, you need at least 1 ELIN per ERL.  ...

I just run into an issue with CIPC and CDP packets advertised by the IP Communicator.It looks like the  CIPC 7.0.5 comes with CDP driver version 1.0 and  CIPC 7.0.6 comes with CDP driver 1.0(2). Both of these version do not seem to send out CDP packe...

Has anyone done this and if so, were there any issues?  I have the partner/site ID's and was going to set it up until I read somewhere that Meeting Center would only work with CUPC if the WebEx Meeting Center server was local.  Is this true and why w...