i know that in CCM 5.1.1 Service > Enterprise Paramters > one options is Auto registration for SIP or SCCP, butit is possible to support both SIP and SCCP phone auto registration at single time ?
i know that in CCM 5.1.1 Service > Enterprise Paramters > one options is Auto registration for SIP or SCCP, butit is possible to support both SIP and SCCP phone auto registration at single time ?
Hello,I want to filter my ldap sync to include only users with the ipphone attribute.I have done this with AXL on CUCM, but the equivalent isn't working with Unity. However the command to show the filter from the command line is.Does anyone have any ...
Is there a way to pass parameter variables in to the Time of Day function for an AA script? We have some relatively convoluted call routing based on the time of day and these change occasionally. We would like to enable office support staff to make...
I am trying (unsuccessfully) to set up the inbound and outbound dial-peers so that I can call from PSTN (over an FXO port) through the Cisco 2811 to a SIP phone. I'm able to call from SIP phone out to PSTN. But dialing from PSTN to SIP phone never ...
How do you add additional languages for Unity 7.x after installation? I cant seem to find any documentation on this. Thanks!
Hello,I am having an issue with the Cisco 7931 IP Phone over a VPN to a UC520. I have my phone connected to my UC-520 over IPSEC VPN and I'm getting a dial tone. When I try to contact somebody at the office using the extension the person hears the p...
ia have my pc (windows) connected to a 3com switch and its takes the ip address from an active directory. but to apply Voice QoS, i need that the CIPC takes an ip address from the voice vlan. placing a 7911 or 7941 in the network plug they take the v...
I have a MeetingPlace Express 2.1.1 installation and have configured Automatic Backup and Archiving but I can't find any documentation (or parameters) that dictate WHEN the backup is occurring. The DocWiki page only states that archiving automaticall...
We have a callmanager v7.1, and we need to restart it. can anyone tell what are the steps to doing the correct sequence?
I was wonder if there is a way for the end user to change the conversation speed on the phone. I have been getting some calls since the upgrade to 7 that the conversation speed (not the message playback speed) too fast or slow. I have been going to t...
Hi AllI am in a very confusing situation here. I have a customer using CCM 8 with Unity 8.0.3. We are trying to install Unified messaging for them. The client domain is being used by various other Companies and one company has already installed unity...
I have several users experience this issue that when they are picking up a handset to dial a number. But the phone automatically dial some random number, and it has happened a lot. Is there any option in CUCM 8.0.3 to turn this auto dial function off...
I am a technical marketing engineer supporting CIsco Unified MeetingPlace, MeetingPlace Express! Ask me anything!Bobbie Martin, TME
We are running Presence 8.0.2 with CUPC 8.0.142.13279. On CUPC fresh installs on Windows XP with the VT Camera III, the Video option is greyed out within CUPC options. The VT Camera III still shows up in Audio options for microphone. And the video...
Folks, After couple days investigating some issues, I come across an error "CDAUI2000 An error has occurred. Contact technical support." But, all info that I found assume that you have CME (Communiations Manager Express) in which we do not have her...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-08-2024 05:34 AM | ||
10-08-2024 12:54 AM | ||
10-03-2024 05:46 PM | ||
10-03-2024 09:27 AM | ||
10-02-2024 10:53 AM |
User | Count |
---|---|
4 | |
3 | |
2 | |
1 | |
1 |