Hello All, What are the advantages or disadvantages of either setting up a SIP trunk to a CUBE or using H323? I also will have an ASA between the CUCM an the CUBE, what are the specific port numbers I will have to allow through for either protoc...
Hello All, What are the advantages or disadvantages of either setting up a SIP trunk to a CUBE or using H323? I also will have an ASA between the CUCM an the CUBE, what are the specific port numbers I will have to allow through for either protoc...
CME allows limited Presence features. Are there any options for messaging clients? CUPC requires a full Presence box. I was hoping there'd be at least a limited or lightweight client for use with CME.
Hello All,First, I apologize if this is in the wrong place, but I have to start somewhereWe are using Unity 4.0(5) utilizing Auto-Attendant and Call Handlers for our branches. Lately, the Unity server has been failing (we are working on replacing it...
We upgraded to Unity 4.0(5) so that we can use the COBRAS tool. Post-upgrade testing is good, with one anomaly. When we try to enter the pilot point of other Unity servers in our servers dialing domain, we get an error that says:'Invalid Character ...
Does a single Unity Connection server have the capability to integrate to multiple Lotus Notes server via IMAP? My customer has about 7 instances of Lotus Notes which contain separate users and mailboxes, but wishes to use a centralized Unity Connec...
Hi All,We're in the process of implementing Unity for a security conscious customer. There's a firewall sitting between the Unity and Exchange server. We have problems with the Notify module in that after 60 minutes the authentication appears to fai...
I have a customer that is interested in building a virtualized unity 7 configuration but is not happy about being required to run CPU affinity. I have read the following:http://www.cisco.com/en/US/docs/voice_ip_comm/unity/virtualization_design/guide/...
Hi - We are configuring CUPS 7.0.4 Outlook Gateway, however, our initial config had the incorrect certificate cn, we are now trying to use the new certificate which we have uploaded but I cannot see an option in the gateway config to use a different ...
CUPC is working except the phone presence. When i go off hook on the phone the status doesn't change to "on the phone" and remains at "Available" status. I have rebooted CUPS server twice and restarted CTI manager on UCM but still no goodCUPS version...
Hi,Can unity support INetOrgPerson accounts? I've got some accounts which are basically email only (hence being INetOrgPerson). When I try and add them in Unity I get the following error:"An unrecognized error 0x800700005 has occurred: E_ACCESSDENIED...
Hello i installed a CCM 7.0 and Business Atendant Console 2.0.1.14. I installed everyrhing by the book. I receive no errors during the installation or after. So everything seems OK. The Operator logs in the console, the CTI ports and CTI Route Points...
We've set up our 2 Unity servers as per http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/installation/guide/vmexfo/5xcuigvmefo050.html - we have 2 servers,UNINTY01 as the primary and UNITY02 as the secondary. UNITY02 is the DC. In the above gui...
Perhttp://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/security/guide/ex/5xcusec030e.html#wp1067900This is a general question - Do I just configure ports restriction 5000-20 on everything EXCEPT DC, GC, Exchange and Unity.Thanks
I have created a CTI port in my CUCM 7 and a call handler in Unity has that CTI number. When I dial the CTI port from internally I get you have been forwarded to a voice mail system. I should get my opening greeting. I am just testing unity before I ...
hi,we look for a solution to realize the following :unity connection 7.1A User with a voice mail box should answer a call in German or English,depending on the calling number (i.e. +49 Germany, +1 USA,Canada) Any good idea ?thx and regardsat
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-18-2024 05:24 AM | ||
06-13-2024 11:36 AM | ||
06-12-2024 07:33 AM | ||
06-10-2024 01:46 AM | ||
06-10-2024 12:13 AM |
User | Count |
---|---|
3 | |
2 | |
2 | |
1 | |
1 |