Unified Communications Infrastructure

Hi allI finished building a lab with CM6, Unity 5 and Exchange 2007 SP1.I did all the steps as the manual shows and all went through.Unity is up and running, and Syscheck shows no problems with Exchange.When I try to import users, nothing is listed a...

I am interested in learning about CUMC and have several questions here:1) CUMC is a end-user application software or can provide lib for engineering to do development?2) what are the deployment platforms of CUMC server, Unix or windows?3) what mobile...

Since patching to 5.1.3, Atttendant Consoles have 6 extra rows at the top with ? **LASTNAME** and in the Telephone Field **PRIMARYEXTENSION**. Until the upgrade, these were not present.

Hello,I want to migrate from Call Manager Express to Call Manager 5.I don't need to change the ephone-dn and each ephone's extension.Question : Is it possible to copy (export) the ephone-dn and ephones that are in the CME to place them into the Call ...

Hi all,I am trying to use a PortSIP (softphone) client on our CM6.0. After I added a third-pary SIP device the status gets rejected. Modifying the configuration doesn't help.Does anyone knows what I can do?Thanks in advance

I have an existing Unity 4.04sp1 UM installation with Failover. Unity is currently integrated with Exchange 2000. We have stood up a new Exchange 2003 environment (Same forest) and wish to re-home Unity to the new Exchange server. I have read that...

Hi,we have installed meetingplace express 2.0.2.126 successfully. everything works fine, users can plan several meetings at the same time. however, once a user starts a reservationless meeting, no other meeting - neither planed nor reservationless ca...

Hi,VM's are working fine but hear message when accessing Messages (see subject). I've ran the Syscheck and only the Domino stuff fails plus:Failure Exchange2KFailure Exchange55 Can anyone shed any light?Cheers,Rich

if the system is saving deleted voicemail is there a way to have unity delete it permanently after so many days or do you need to use the manager tool to set this up

We are running CM 3.1(3a). When we attempt a conference call and push the conference soft key, we receive the message "No conference bridge available". I have verified that the software conference bridge is setup and assigned to the 'Default' device...

I am running into issues with a 2811 MGCP gateway running a NM-HDA module, I am unable to get the FXS ports (4 onboard) to register. The ports are configured as well as the dial-peers with the "service mgcpapp" command but the devices still don't re...

I have two server one is Publisher and one is subscriber, my subscriber server as TFTP server.but Problem is when subscriber is Down then Publisher cant takeover all my Phone ???? all Phone is Down please what should be problem please give me soluti...

I have a centralised CCM/ Unity with SRST at the remote sites. Can I install a local B-ACD to provide a AA for the remote sites- Press 1 for operator , press for x etc on the SRST box. The sites are not CME but SRST- is the set up the same ? Though ...