Hello everyone, Scenario is as follows: ITSP > CUBE > CUCM > Phone A call forward to Phone B > Phone B call forward to Mobile > CUCM > CUBE > ITSP Within the above scenario, CUCM is sending two Diversion Headers within the INVITE sending to CUBE. R...
Forum Posts
Hey there,I hope I'm on the right Board.So, I have a few problems configuring the required privacy settings my boss wants.Some side information about the setup:- onpremise Pub/Sub- extension mobility in use- no LDAP/AD connection- all users, devices,...
When I upgrade CUCM which version is 10.5.2 to CUCM 14 by Fresh Install with Data Import, it get an error. I have checked the destination server IP and the SFTP directory and it's correct. How should I troubleshoot ?
Hello Guys, Can someone please help me with the sample configuration of VG350 analog gateway. i want to configure it with CUCM 11.5 and register analog phones and FAX machines. VG350 is new for me and i am not sure what is the best way to con...
hi Expert,When configure VG410 in UCM 12.5 for SCCP, I don't see option for VG410 (only see VG400 and VG450)Should we select VG400 or VG450 in UCM for SCCP? and what is the different?Tks,V
Trying to put an extension on a call handler but getting the error thta it already is assigned in the partition. However, I cannot find it assigned to any call handler, directory handler, interview handler, user, or user alternate extension. How do ...
Hello,Our call center has an Avaya phone switch that connects to a pair of Cisco C8300s via fiber:Route1 = Avaya -> Media Converter -> Fiber -> Media Converter -> C8300 T1 -> CUCM Route2 = Avaya -> Media Converter -> Fiber -> Media Converter -> C830...
Resolved! Last Active Column
In the device - phone there is column 'Last Active' Actually what last active mean? Seem i have many registered phone but las active is empty
Resolved! CUCM ungraceful shutdown detected
Anyone ever facing this issue? If we reboot the cucm then the system will bootup normally?
I'm not sure how to disable the SFTP port on Cisco CMS, and if I disable it, will I be able to enable it again later? Please kindly advise.
Hello All, I am not able to access the DRS Backup and Restore menu, including the backup device. GUI loading for very long time and fails until the server logout through timeout. I tried to access through CLI using the command utils disaster_recovery...
Is anyone still supporting the ciscounitytools pages and tools? I have been using these for a while, but I think they may need some security updates. When using the Call Handler data dump tool, all the WAV file downloads failed because of an SSL/TLS ...
Hi team, I have a scenario:I have a toll-free number that is forwarded to a Unity Call Handler. After the greeting, whatever number the calling party dials should be routed to the corresponding extension in CUCM.How can we configure this?
I have a mailbox which the user wants a custom greeting for. Originally I went into the standard greeting, set it to use my personal greeting and uploaded the WAV they sent me. The system still plays the system default of Sorry.. Username is not avai...
Hi, We've CUCM 15.0. We want to play a busy message like "The person you have called is busy now. Please leave a message" when the directory number is busy. How can I implement this? Any idea?
