Unified Communications Infrastructure

Hello Community Forum, I need help with the following.  We are moving SVR records so different values can be returned depending on where the request comes from.We have been asked to provide throughput information of the Cisco Expressway's we host in ...

HiI need help. I have 2 switches that are in stack mode(WS-C3850-12XS). I have 2 server with 2x2 connect in port-channel mode auto and working.as soon as I put the Cisco (ESXi) in port-channel, I lost connection.. I have all the settings the same.int...

Hello Guys, I have configured SIP Line from Service Provide on the 4451 ISR Router. Link is not getting registered. blr-vg-6a-01#show sip-ua register status --------------------- Registrar-Index 1 --------------------- Line peer expires(sec) reg surv...

I'm trying to upload a custom cert to my PCD deployment so it shows as secure when I connect via https. I've found some reference documents online from cisco stating that there should be a administration - certificate management section of the web gu...

I am unable to register Cisco IP Communicator. The device shows registering all the time. I know we need to look at EventView logs from CUCM. But when I download the logs it shows nothing. I am using TranslatorX to read the logs. Any other troublesho...

Client ordered for 12.5. and but now they want to install version 14. Its like POC kind of project. so stability is not a issue at that moment. how to get it. they have valid smartnet contract? but to get files its not working as they want. cisco end...

Hi,We are using Cisco call manager version 12.5 and we need to pull out the report of users who actually logged into their extension numbers.Is there a way to pull out the extension mobility users logged in details report for last one year ?Pls sugge...

Ok, ok.. im being asked to ask, so Im going to ask... after upgrade from 3.15 to 4.04 im noticing that unity no longer says "Please leave your message..." or "Please wait while I transfer your call" etc... Was there a reasoning behind leaving the pl...

Hi all,I was given a Yeastar TG800 to integrate in a working CME already connected to the Landlines.Anyone to help me implementing this, as I've never done it before.Config:boot system flash isr4300-universalk9.17.04.01a.SPA.bin!!voice call send-aler...

Dear All,              We need upgrade our cucm from 12.5 Su4 to 12.5 SU8a, Kindly advise how can do this task without down time ? It's critical environment and prohibit to any interruption.

I have CUCM cluster consists of 1PUB+2SUBs+2TFTPs. I made cluster restart and found the publisher & one subscriber nodes are having the attached message and I had to press enter key to make them up. Anyone faced the same issue? Thanks in Advance @Jai...