I created hunt pilot queue for playing initial announcement. everything working fine while calling internally. i tried custom audio file and used default cisco audio file. but when tried to call from PSTN we are hearing silence and after that it forw...
Forum Posts
Resolved! CUCM Upgrade
hello im try to upload CUCM 12.5 ISO TO my Sub i got this error The version obtained from the name does not match the active or inactive version of the publisher i remove the sub from cluster i still has same issue thanks
Resolved! CICM V10.5
Hello I have cucm 10.5 two node i update the Pub and change the ip put ica not login but Sub still not change the ip and not updated to 12.5 i can not login to Pub please help me thnaks
Resolved! CUCM Upgrade question with SIP Profiles
Hello,I am in the process of upgrading an older cucm 9 instance to 12.5 using PCD. now while reviewing the instruction article for upgrade to 12.5 i see this not specific for the source version being 9.x:"Upgrades from Unified CM 9.xUpgrades from Uni...
HiCUCM version 11.5. We see errors in the dbreplication "runtimestate" output .When we looked into the output file we see this is related to "credentialdyanmic table". The Replication status however shows "2".We did run the repair table command and ...
I want to know how the CUCM will come to know DTMF is pressed in in-Band DTMF like RTP-NTE is used and when it needs to introduce MTP to extract the DTMF to send it in signal channel. Since, RTP is end to end phone communication rather CUCM doesn't c...
Hey All,I am trying to set up a proof of concept in my lab for Ad Hoc Encrypted Conferencing using he Cisco Meeting Server as a Conference Resource in an MRG/MRGL set up. I have it pointed to a SIP Trunk to the SME in the Conference Bridge configurat...
I have a ISR 4321 Version 17.06.03a. Router has a NIM-2MFT-T1/E1 for PRI connection, this voice gateway will be a MGCP gateway controlled by a CUCM ver 12.5. Here you have my controller T1 0/1/0 config: controller T1 0/1/0framing esflinecode b8zscabl...
I have a request from the client that they need to play an announcement or message to the calling party when they call an extension ex (1124) and hunt pilot number (1200) . After that the call needs to get transferred or forwarded as required. How ca...
Resolved! Can ISR 4331/K9 use 8E1 * 2 ??
Hello, everyone I have a question, Voice Gateway Devie ISR4331/K9 have 2 slots, So, ISR 4331/K9 use NIM-8MFT-T1/E1 * 2??
Do I need to restart any services or reset phones after Updating QOS settings (in service parameter configuration) in a CUCM cluster on 11.5.1?
I'm trying to get an account for all the conference phones in community phones in our environment. I was told that it's possible to search for active phones with no assigned use. If so how? With. Dose anyone know the best way to go about doing this?
Hi Team, I have a plan to replace current VG from E1 to SIP. In current E1 RoutePettern config there are something like ; RP PRT GW/RL1234 A X >> To E1 >> RG= PSTN A,B,C 1234 B Y >> To E1 >> RG= PSTN C,B,A So, th...
Resolved! CUC and Expressway-C/E Resizing
Hi to everyone.https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html#resize_vmAccording to the above document it says that "Adding vCPU is supported for all apps except Unity Connec...
Resolved! IM&P VM Resizing ways
Hi guys.I've read many posts but unfortunately I did not come to a conclusion.I have the below scenarios of IM&P version 14 with 1,000 & 5,000 & 15,000 devices and I would like your opinion. Lets say I have a live and running IM&P version 14 VM with ...
| User | Count |
|---|---|
| 3 | |
| 2 | |
| 2 | |
| 2 | |
| 1 |
