Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hey guys!I've experienced that both on my 7970, 40 and 41 that the headset port is inactive.Is this a default setting, and can it be changed?
Hi Learn to upgrade/migrate Cisco CUCM 8.6 to 11.5 Online Webinar - August 4th - 12:30 PM Eastern Time (GMT -5) - Click Here to Register Online Webinar - August 6th - 1:00 PM Eastern Time (GMT -5) - Click Here to Register Learn Best Practise for U...
Hi people, we have na issue with a crash on router gateway. 258 -rw- 227471 Aug 8 2016 14:07:40 +00:00 crashinfo_20160808-140739-UTC 259 -rw- 258182 Aug 12 2016 18:48:42 +00:00 crashinfo_20160812-184843-UTC According to https://bst...
Hi experts, I am taking some global knowledge voip training (self-paced). She is talking about how the outbound dial-peer is selected. She said and I confirmed on google that, destination-pattern is the only rule used for matching. However please tak...
I have two CP-8831's connected via a DP-8831-DC-CBL daisy chain cable and the "primary" unit is successfully registered in CallManager. However, I can not get the "slave" module to connect. The following is from the Console Log on the "primary" uni...
Hi, I am currently looking at a trace for outband DTMF, long and the short of my question is this .... Originator sends a late Invite with no SDP etc, I reply in my OK, under RTP/AVP offering 18 - G729 and under this a=fmtp:18 annexb=no However, in t...
Hi , Is there some way to Auto-Deactivate / Auto-Disable an extension after a user does not login into it after say a set period of time ? To explain the scenario - we have around 4000 employees over three branches . Now to promote extension reuse ,...
Hello All, I just updated my cipc to 8.6.6 on win10. it got registered successfully but for every 5 seconds its getting refreshed. my cucm ver is 6.X. any suggestions?
Can anyone provide any information/experience regarding registration of third-party (non-cisco) endpoints on iPad and Android devices for CME 8.6?ThanksCI
We are receiving RTMT alert for HDD for this we checked the "sh hardware" command in which Media Error Count: 83 Other Error Count: 4 Predictive Failure Count : 0 is there need to change the HDD for this server . it is MCS 7835 server & CUCM subscri...
We have setup VPN phone with cucm 8.6 with username and password authentication. Every time phone reset, it ask for the user and password although we enable password persistence in CUCM How to let the phone connect automatically after reset withou...
Hi All, We have a cluster with 4 CUCM nodes (Version 11.5.1 - Latest version for now) in mix mode. We have 7841 IP Phones and we configured Phone Security Profile that makes authentication by mic on the CAPF process. The CAPF is signing the LSC's for...
Hi, Hopefully an easy question for someone. We've been shipped a 7821 IP phone but it's got the 3rd Party Call Control software on it. I'd read that I should be able to upgrade to enterprise using this: http://<phone_ip>/admin/upgrade?<schema>://<s...
i made a sip trunk with another country but only calls from my side are working , when they try from their side they get a busy tone , could it be from my side? or calls working from my side narrow down the issue to their configuration? if my extensi...
Hi,When doing some configuration changes , the administrator is asked to :"Restart the Connection Conversation Manager service in Cisco Unity Serviceability for these changes to take effect". However, we can't find this service in the control center ...
