Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Call Manager 7.1.3.20000-2 ATA186 firmware version 03.02.04(090202A) We've experimented with Auto Provisioning which has worked really well. The one thing I can't resolve is how to stop the ATA's with an unused phone 2 port from Auto Registering. It ...
Hi, scenario: a calling machine or a PBX named AlertingServer is connected to a Cisco Communications Manager 10.x via Standard SIP Trunk. Now this server is calling phones via the SIP-Trunk with an alerting message. But unfortunately these phones are...
I have all the phone numbers within my organization in the same partition. How can I grant the phone access to call these numbers?
HI guys, I have aquestion. User has an expansion module (36 button CKEM)attached to his Cisco 8961 Sip phone and he is not able to configure the KEP module. He tried to do it in the Endusers webpage but the menu telephone configuration is missing. W...
Dear All, I have got a couple of 7911 phones running on SCCP11.9-4-2SR1-1S firmware which are not registering, and show rejected status. I deleted the phones and added back but no luck. What could be the reason? For your information, only 5 out of 35...
Hello Community, may be it gives a solution :-) The goal is to Plug in a New VG20x in Power and network and setup first config via IP Remote, not w/ console Problem is some VG20x runs in a initial Setup, some VG20x runs directly in prompt and get an ...
Dear Community members One of our customers is running CUCM 11 and has VG202XM registered as MGCP gateway. All ports fot a status of "Registered" inside CUCM, however when users pick up handset of connected phone, they do not hear any dialtone. Outg...
Hi all, I have a Hunt Pilot number 7777 which corresponds to DID 987777. On my route list, i already have a common Calling Transform Mask of 98XXXX. that is used by the whole company. Use Calling Party's External Phone Number Mask = ON 98777 = 7777...
i have a DX650 phones for managers that for no reason stop making calls and get unregistered from the cucm 10.5 , only restarting it fix the issue , i have about 20 of them and only three that are experiencing this issue , all of them are running the...
Hi, I need to know the EOL/EOS of ISR G2 series router. Can it be announced in near future ?
Hi All, Does CME also has a Global Directory Configuration like the CUCM where in we can search or find a user and directory number? Thank you.
Hi Everyone I'm trying to enable sip option ping but it still seems unknown. I have created new sip security profile as selected "enable ping option" checkbox and associate to related sip trunk it, reset/restart trunk sip security profile. There ...
Hello, I want to test our internal network for voice readiness (Delay, jitter, latency, bandwidth) are there any tools commercial or free which i can use to set up a server in network and test the client from various locations in our network for VoIP...
I have 5 phones in our NOC that all have the same four numbers. I would like to figure out the BLF so they can tell when someone is on say line 1
Hello everyone Working with CUCM 9.1 CUBE We have just moved to a new tel-co SIP trunk for our external calls, everything went pretty smooth but we a single location with the scenario below - If a user calls in and asks to be transferred to anyone...
