Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I want to purchase data-k9 license to upgrade on Cisco2911/K9. How can i do ?
I was asked by a customer to setup a toll free number to ring an internal extension for example extension 2095 which is a HP that will ring 3 extensions included in the line group in top down order and then if there in no answer to roll to voicemail....
Hi ,Reading through the SIP timers, I came across the Timer C in proxies. Does anyone know what timer it is timer C in CUCM please? I am using CUCM 9.1.2. Thank youKind regardsG
Hi,Can somebody tell me how to localize a no. if call is coming from national no. using calling party transformation pattern. Call flow:- My national no. is 04554558000 (On PSTN)----->+1 and strip digit= 1(Globalization on MGCP gateway on cucm).Now c...
Dear AllWe are going to install Cisco unity connection v10.5 as subscriber for the exiting unity connection , during installation we got the attached error . We are using Cisco UCS servers Cisco Business Edition 6000 M Svr (M3) and OVA for unity conn...
I have Cisco UC Phone Model 7942G bearing Sr. no. FCH17129NCS. wewants to install it with third party exchange. please provide support mehow to install it.
Hello, on my router I am currently identifying 'cs6' marked outgoing traffic and re-marking to 'ef'.Vice versa, when incoming 'ef' traffic comes back in to my interface, I want to convert it back to 'cs6'. Would my code below achieve this ?Thank you ...
I am configuring H323 protocol between CUCM and other PBX for voice service. I have managed to make some remote sites work, but some others do not work. The flow would be the following: CUCM --> Main GW --> Remote GW --> Remote PBX, all through H32...
Hi guys, I have a problem with some 6921 phones about the "Missed Calls history". I have seen that is a firmware problem.Really I have some phones on problematic firmware version, it's Ok and I know that I need to upgrade the firmware.My CUCM firmwra...
Hi all,I configure a cisco call manager 5.0(2).I m using only 7911 IP Phone.i have enable extention mobility.when i login with a profile i do not have the option to logout. I then connect to the call manger and logout.could you please help?
Whilst upgrading my 7961G-GE to the lastest firmware [9.0(2)SR1], I was reading through the release notes and noticed the following:Extension Mobility Change PINThe Extension Mobility Change PIN feature allows users to change their PIN from their Cis...
Hello everyone, I'm running CM 10.5 and wanted to know if it was possible to forward/route calls from a CTI Route Point to another CTI Route Point AND a Hunt Pilot simultaneously. We just got a new attendant console and this one doesn't support CTI ...
Hi All,i upgraded CUCM version from 9.0.1.10000-37 to 9.1.2.13900-10 before upgrade i didn't have any licensing issues and i had almost 100 spare licenses too: But, after upgrade i got licenses issue and ELM shows there are some unsupported license...
One of our MOH Servers is in an Unregistered state. Here is what we tried so far:Serviceability --> Cisco IP Voice Streaming Application --> Stop --> StartThe MOH Server still shows Unregistered. How can we get it to register with CUCM?
Having the following issue: I'm connected to company network via Cisco AnyConnect Secure Mobility Client.Connected to IP phone via Cisco Jabber 10.5.1.Can make an internal call to any company phone number, but NOT to an outside phone number.We use th...
