Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
After awhile I can not receive calls. I check cfwd all dest and find 011972542935554 in the field. I delete it and everything works fine but it returns on its own later. model SPA122
Hi Guys,I know there are nurmerous threads about this on the forums however I am unable to find the answer from all the discussions and documentations..We have a DX80 registered on our CUCM 10.5.1..As described in the guides, these CUCM registered TP...
Hello, I have a brand new CUCM 10.5 environment in my lab. The system (CUCM, CUC, and IM&P) was configured using Prime Colab Provisioning. The phones are provisioned. It (PCP) also built the trunk to my voice gateway.My voice gateway is a 2921 run...
Hello Everyone, My co-worker and I have been trying to convert Cisco 7961 phone over to the SIP protocol to use with a open source call manager. On a windows 7 machine, we have TFTPD32 setup (version 3.23) for DHCP for 192.168.1.1 network. Starting ...
Does anybody have a script for a simple CUE AA that will play a welcome message and then allow the caller to press 1 for sales, 2 for accounts etc? Or if not does anybody have any pointers for the scripting tool?Thanks.
Hi,Is there any report on CUCM 6.x shows when the user login and logout using extension mobility feature during period of time for example one month.
All,Is it possible to pull information from call manager regarding the last usage/login of extension mobility profiles?It seems like itd be a well requested feature to allow people to keep their call managers up to date, is it possible to run a repor...
We have two CCMs in a cluster and running extension mobility on one of the server, if that particular server goes down we are unable to login on phones. Can we have redundency on extension mobility service in the cluster?
Hello,Its possible to know how much time a user doesnt log in with the EM User in a device?RegardsLeonardo Santana
I have a CUC version 10 with sip integration to cucm version 10. Some phones mwi works fine others nothing I cannot see any issues as we can leave messages etc If I go inti the USR / MWI Setings and do a reset all the mwi starts working. Any ideas?...
Hi,We have setup a H323 VGW with 2 E1 circuits attached.Each circuit has it's own DDI Range applied to it.The problem we face is that when calling out from the phones with the DDI Rangeon circuit 2 it is routing out of circuit 1 and showing an incorr...
Dear Team, We have two sites , A in Egypt and B in SaudiThe site are connected through VPNSite A already have CME ISR.We will also install a CME ISR in Site B also.will we able to configure the phones to make calls between the site A and B by just di...
Hi,I want to use the SQL command to update the CM enduser attribute.CM 1 version is 10.5 & CM 2 version is 10.5CM 1 update fail:admin:run sql update enduser set ocsprimaryuseraddress='petter_chan@abc.com' where userid='petter_chan'No UPDATE permissi...
Hi, I Have an MCS 7800 (end of life) that has give up the ghost. Red light is flashing on the front panel of the server - won't boot. To cut a long story short, I am wondering if I could buy a second hand server of the same model and put my existin...
Customer has Call Manager 10 and wants to add 220 Phones with Standard License including voicemail capability. What is the TOP level PN please?
