Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Having a strange problem where I have received multiple tickets on IP Phones that have lost their external mask configuration.Example: On Friday night all phones have an external mask of Ex: 2125551212, Monday morning the Mask is 212555XXXX < THis is...
Can we have CUCM 10.5 publisher and subscriber in different subnets ?
Good afternoon - I had an urgent request to forward a number out of our DID pool to a satellite phone, which I was attempting to do with a translation pattern. When that didn't work, I tried setting that DID up as a regular DN, but not assigning it t...
We have a CUCM ,IM&Presence,CUC =8.5 version,what are the collaboration feature i can with this existing version or should i need to upgrade latest version?
Hi All,A user is facing issue with during Conference call.when more than 4 numbers is joined into a single call and one of those numbers is an external number, the original called is kicked off when joining the 4th participand, leaving behind the co...
Hello, I have a cluster of CUCM 9.1 with 1 PUB and 2 SUB( SUB01 and SUB02).Currently, the SUB01 is in a bad state of replication - > State 4.SERVER-NAME IP ADDRESS (msec) RPC? (ID) & STATUS QUEUE TABLES LOOP? (RTMT) & details----...
Hi All,Trying to find examples of configuring SIP phones (3905,7821,8945,8961) with site wide paging but can only see SCCP configurationThe phones are configured on CME 10 as shown below:##########################voice register dn 1 number 243 voice...
Hi,I have trouble at my customer's premacies in Germany. Customer has CUCM with 2911+BRI.If they call local, national or cellphone inside Germany everything seems to work. I am sending calling number as ISDN/National and presentation is OK (+49 911 5...
Hi all,I am trying to configure the hardware conference for my customer in the CME 8.1 environment.When i trying to associate the DN into the Cisco SCCP phone, it showed me "Cannot associate hw conference adhoc dn 140 to button 1"But my sccp conferen...
I am an old dog in the UC world, and past versions of IOS had a limitation as to the number of voice translation rules you could have in a translation profile.Does anyone know what the limit is for a 3925 running 15.1 series code? I have a client wit...
First off let me explain the scenario...We have some remote sites that are connected to our VOIP network using ASA VPNs over the Internet. I have QOS all set (took me quite a while to get it all set properly and tested) and we have been having no...
I'm using CUCM 7.1.5, now. But, it has not supported Cisco IP phone 3905.Hence, do I only need to install a firmware of 3905 to CUCM or I have to install a device package for CUCM 7.1.5?Thanks.
This is my first voice gateway deployment in Germany - the German dial plan has proved to be challenging compared to the US dial plan.I have a 3845 router with an E1 PRI. Inbound/Outbound calling work fine with the exception of certain numbers.Prim...
Cisco Support Use 1 to allow Huntgroup to be placed in Call Pick Up Group. Is it safe to use in 9.1?
Hello,We have Unity Connection 7.1.3 on UCS & we are upgrading to 8.0. Our target upgrade version is 10.5.While upgrade we are getting following error.Error encountered : errors. upgrade.connectionHWDisallowd.We have used CUC OVA file to build CUC 7....
